The spark plug gap for a Stihl MS460 chainsaw is typically set at 0.020 to 0.025 inches (0.5 to 0.65 mm). It's important to check the owner's manual for specific recommendations, as variations may exist based on the model or production year. Proper gap settings ensure optimal engine performance and efficiency.
0.020
ngk bpmr7a
To change the spark plug on a Stihl Wood Boss 024 AV chainsaw, first ensure the chainsaw is turned off and cool. Remove the spark plug cover using a screwdriver, then use a spark plug wrench to unscrew and remove the old spark plug. Check the gap on the new spark plug, install it by hand to avoid cross-threading, and tighten it with the wrench. Finally, replace the spark plug cover securely before starting the chainsaw.
To change the spark plug on a Stihl 024 AV chainsaw, first ensure the engine is cool and disconnect the spark plug wire. Use a spark plug wrench to remove the old plug by turning it counterclockwise. Install the new spark plug by hand to avoid cross-threading, then tighten it with the wrench until snug, but avoid over-tightening. Finally, reconnect the spark plug wire, and your chainsaw is ready to use.
Depending on the model there should be a cover above the throttle handle. The spark plug should be under that cover.
plug gap should be .025" http://store.chainsawr.com/
The correct spark plug for a Stihl 024 is an RCJ6Y (Champion), BPMR7A (NGK), or a WSR6F (Bosch). Make sure that the gap is set to 0.020 inches.
The spark plug for a Stihl FS36 is a Bosch WSR6F gapped at .025
Spark plug gap is .020 [or 0.5mm metric] Bosch plug numbers are 7547 and WSR6F [either can be used] Can be converted to Champion or NGK, etc. with an online conversion chart. T'care, Mike
.020
.025" spark plug gap http://store.chainsawr.com/
0.020"