25 to 36 on the low side 178 to 237 on the high side
134 recharge for 1993 ply voygerI had to recharge mime a couple day ago. on the Plymouth voyager it has a color code outlet. red is high pressure and black is low pressure. about foue inches on the firewall is a black cap. screw it off, recharge it there.
How much r134a to refill 2003 ford expedition
It takes R134a freon, that's it, no special type..........
R134a
R134a R134a freon and also don't forget to add oil as well..........
All of your charging to your ac system is done through your low side port. The low side service port is located in the line that runs from the compressor through the evaporator (firewall) and up the condensor on the low pressure (suction) side of the system. R134a recharge hoses will only fit on the low side service port on all R134a vehicles and R-12 vehicles that have been converted to R134a.
To recharge the AC on a 1992 Crown Victoria converted to R134a refrigerant, first ensure the system is off and the engine is running. Connect the R134a recharge kit to the low-pressure service port, usually located on the larger diameter line. With the engine and AC on high, monitor the pressure gauge on the kit and add refrigerant until it reaches the recommended pressure, typically between 25-45 psi, depending on ambient temperature. Always check for leaks and ensure the system is properly evacuated before recharging.
Take it to an A/C shop.
R134a
Yes, that is the proper refrigerant.
The recommended pressure for R134a refrigerant in a refrigerator typically ranges from 25 to 45 psi on the low side and around 150 to 250 psi on the high side, depending on the specific system and ambient temperature. It's important to check the manufacturer's specifications for the exact pressure requirements for your model, as these can vary. Always ensure that the system is properly charged to maintain efficiency and prevent damage.
No