It is a T55
I believe it is a 12 point metric socket Not sure of the size though.
what size torx bolt holds the rear parking brake housing on the 2005 chrysler pacifica
From the sounds of your question, you may need professional help. You are going to get yourself into some expensive trouble.
no its a t-60
T10
To remove the front rotor on a 2004 Monte Carlo, you typically need a T30 Torx socket. Make sure to check for any additional fasteners or components that may need to be removed to access the rotor properly. Always refer to the vehicle's service manual for specific details and torque specifications.
what size torx for a 96 ford bronco?
Torx #45
Torx #47
For my 1999 Sable it is a Torx 15mm. I got one from O'Reilly and this is what they claimed is the correct tool. I was able to loosing the bolt on the tensioner, but the torx socket was somewhat loose. Captainjack75040
AnswerRemove wheel Remove caliper (2 15 mm head bolts) Remove caliper mounting bracket ( requires special large torx socket, forget exact size, available at Sears) Rotor will now fall off practically. after machining or replacement, reverse process above. Should take less than an hourThe torx socket size is T-60.
I believe that's a Torx 25