0
Hard to imagine how this gas could be swallowed but there you are... The MSDS for this compound does not recommend first aid for swallowing, and most damage done seem to relate to the gas coming out from under pressure (cold injuries) or being pressurized (heat injuries, possibility of explosion, combustion, exothermic reaction), or of it displacing air in a room, thus causing hypoxia.
For skin contact, flush the treated area. It is thought that this compound may be a central nervous system depressant in unusually high dosages.
If swallowed, however, the MSDS first aid section simply reads: Call the doctor.
What else can I help you with?
What is the 410a operating pressure?
The 410a operating pressure is 7.037 Barg or 102.036 psig.
Can you recover r-410a freon?
If you add 410A to a heat pump does it put out more heat or less?
The minimum safety-relief pressure for a R-410A cylinder is .?
minimum pressure is 525 psig for R-410A
Do you have to braze 410a?
Yes, its a requirement of all manufacturers, that i know of, to braze 410a connections with a brazing alloy containing a minimum of 15%
Does R-410A have an odor?
R-410A does not have a noticeable odor, as it is a blend of two hydrofluorocarbon refrigerants that are both colorless and odorless. If a leak were to occur, it is recommended to use proper leak detection equipment to identify the presence of R-410A in the air.
What is the saturation temperature of r-410a at 38 psig?
The saturation temperature of R-410A at 38 psig is approximately 18.5°C or 65.3°F.
To change the compressor on a system containing R-410A you must isolate the compressor then?
To change the compressor on a system containing R-410A you must isolate the compressor then?
What type of oil is used wih r-410a?
R-410A refrigerant is typically used with polyol ester (POE) oils. POE oils are synthetic and are preferred because they are compatible with the high-pressure environment of R-410A systems, as well as providing suitable lubrication for the compressor. It’s important to avoid using mineral oils with R-410A, as they are not compatible and can lead to system failures.
Can you change r-22 to r-410a?
yes
Is the eco-temp wca3242gka1 R-22 or 410A?
The Eco-Temp WCA3242GKA1 uses R-410A refrigerant. R-410A is a more environmentally friendly option compared to R-22, which is being phased out due to its ozone-depleting properties. Always check the specifications or the unit itself for confirmation.
What internal pressure of a cylinder with one ounce of liquid R-410A refrigerant which has been sitting in a 100 degree Fahrenheit truck is?
The internal pressure of a cylinder containing R-410A refrigerant with one ounce of liquid will depend on various factors such as the temperature-pressure relationship for R-410A and any external conditions affecting the temperature of the refrigerant. However, at 100 degrees Fahrenheit, the pressure of R-410A is approximately 228 psi.
Can you mix 410a with r-12 in a cars ac system?
No
