To change the front brakes on a 2004 Chevrolet Silverado, you will need a few essential tools: a jack and jack stands to lift and secure the vehicle, a lug wrench to remove the wheel, a socket set (including a 14mm or 15mm socket) to remove the brake caliper, and possibly a C-clamp or brake caliper tool to compress the caliper piston. Additionally, having a brake cleaner, new brake pads, and possibly new rotors on hand will ensure a complete brake job. Safety glasses and gloves are also recommended for protection.
a torx bit size t-55 for front brakes
No special tools needed.
You need a 3/8 Allen key.
brake fluid.10 mm 11 mm , wd40, and a buddy to help ya
The plastic valance on a 2000 Silverado is a used as a combination of aesthetics and air flow. Removing it could slightly reduce mileage.
A 2000 Chevrolet Silverado with a 5.3 liter engine takes 13.4 quarts of coolant. It is suggest that the coolant be mixed 50/50 with water.
FIRST YOU MUST HAVE A obd2 engine scanner and then scan the ABS brake system to be able to determine what is wrong with it. Then repair as needed
2.5 pound or at least that's what my 1990 Chevrolet k1500 says it takes you might can look on the sticker on top of the silverish cylinder at the top left under the hood.
the same way as you would on a RWD or AWD car. but more information is needed to answer such a question. what part of the brakes????
5 with the filter
5 qts. with a new filter.
A 3/8 Allen key.