The compressors today do not have sumps so the oil circulates throughout the system.
the two lines that bolt to the compressor is where the oil goes. hope your system is empty. if not then use a tool (got mine from bg products) that will allow u to add w/ freon in it
how much ac oil do i put in my ac copressor
Yes!
changing ac compressor only, how much oil do i add 2.7 Toyota tacoma 1999.... 6 ounces
Yes, Because it won't work right if you do not oil.
If you only replaced the compressor, 2 to 3 ounces.
You should not put any oil in a Ford air conditioning compressor. The air conditioning compressor runs on Freon. The system should take about one pound of Freon.
The compressors that come with central Ac systems are hermetically sealed and have oil inside. There is no need to add oil. If you are replacing the compressor then flush the line set first then replace, also install a filter drier.
3 or 4 ounces.
To add oil to a new AC compressor in a 1999 Chevrolet Blazer, locate the oil fill port on the compressor, which is typically a small plug or fitting. Use the manufacturer's recommended type and amount of refrigerant oil, usually specified in the compressor's manual. It's essential to add the oil before installing the compressor to ensure proper lubrication. After filling, reassemble everything and recharge the AC system with refrigerant according to specifications.
The oil is in the freon along w/leak detector.
7 ounces
The amount of oil charge required for an automotive AC system is specific to the car. There is not standard amount for all cars.