You have to remove the starter and the sensor is behind there in the rear of the engine block.
driver side on the back of the motor where is crak sensor on 94 jeep 4.0 grand Cherokee
Crank sensor is on the driver side of the bell housing, Cam sensor is in the distributor. Computer is mounted to the inner fender.
The crank sensor is on the top driver side of the bell housing.
Jeep dealer.
It has both, The crank sensor is on the timing cover passenger side behind the balancer. The cam sensor is the distributor, Inside of it.
Behind the crank pulley
what size engine 2.2
Do you have a 4.3L with a distributor? If so, the crank sensor is in the distributor and may also be called an HEI pickup or Hall switch.
no spark, no start
The crankshaft position sensor is located on the front side of the engine block near the flywheel/driveplate
If its a 3.0 td model the crank sensor is situated on the o/s in the engine casing , its accesible from underneath with a long extension and a 10mm socket
The crank sensor probably needs to be replaced.