Underneath the truck,on the driver's side rail, about halfway between the front and back of the truck. It requires a special tool for removal that you can buy at the auto parts store.
check over the back axle like directly obove attached to the wall driver side.
To replace the CV axle on a 1991 Mazda 2600I, first, lift the vehicle and remove the wheel to access the axle hub. Next, detach the axle nut and any components like the brake caliper and rotor if necessary. Once the axle is free from the hub, pull it out of the transmission or differential, then insert the new axle and reassemble all components in reverse order. Finally, ensure all fasteners are securely tightened and lower the vehicle.
on the firewall passenger side
The safety fuel shut off location on a 1991 Mazda MX6 is under the dash. It is on the far right side in front of the passenger seat.
on a 96 its on the driver side fender
The 1991 Mazda 2600i pickup does not have a standard OBD-II port, as it predates OBD-II regulations. Instead, it uses an earlier diagnostic system, typically accessed through a connector located under the dashboard. To check for trouble codes, you'll need to use a specific diagnostic tool or jumper wire to connect certain terminals on the diagnostic connector, then turn the ignition to the "on" position. This will trigger the check engine light to flash codes that indicate any existing issues.
In between the bumper and the frame, on the passenger side.
Look under vehicle follow fuel line from tank
On a 1991 Mazda B2200, the fuel filter is typically located along the fuel line underneath the vehicle, near the frame rail or close to the fuel tank. You may need to raise the truck for better access. It's usually a cylindrical or inline filter secured with clips or brackets. Always ensure to relieve the fuel pressure before attempting to replace it for safety.
how do remove the brake drum on a 1991 mazda 323
Between the tank and the engine .... The fuel filter is located underneath the car on the passenger (right) side. It is located just forward of the fuel tank and is covered by a protective plate.
Mazda Navajo was created in 1991.