On a '99 suburban, the low pressure a/c port is on top, towards the back of the compressor, and pointed forward. The high pressure port is there also, just behind it and to the left, pointed straight up.
The low pressure port on any A/C system will be the the line running from the compressor and going into the evaporator in the passengercompartment. The high-pressure port is in the line coming from the condenser in front of the radiator going to the compressor.
It should be about six inches from the compressor. The large line.
Looking at it the one on the right
The Low side line attaches to the compressor on the driver side of compressor. The charging port faced forward. The high pressure port faces up.
look for the port with the black cap on it, it's the low pressure port.
On the ac system, the low pressure port is the smaller port. It will be located on the line coming from the dryer. The low pressure line is the larger line. it will be on it.
low pressure port is on top of the ac compressor
No, the low pressure port and the low pressure switch are not the same thing. The low pressure port is used for connecting a gauge to measure refrigerant pressure in the system, while the low pressure switch is a component that monitors the pressure level and can shut off the compressor to prevent damage.
the low pressure port is right on top of the comperssor
The 1997 Volvo 850 low pressure port is located on the air conditioning compressor. The low pressure port will be on the right hand side of the compressor.
The low pressure port is the one on the accumulator (the canister). The low pressure lines are the bigger lines and the high pressure are the small lines.