You will have to remove the air cleaner housing complete and then look under the hood and the low side will be in the center of the van, just follow the low side pipe and you will be able to feel the service valve cap.......
The air conditioning recharge valve on the 2003 Ford Explorer 4.6 is located on the low pressure side of the air conditioning system. Located on the line coming from the accumulator to the compressor is the recharge valve.
It costs about $120 to pump down and recharge the freon in an A/C.
A proper Ac shop should do it around $70-80
You need a vacuum pump, gauges and freon. Take it to someone who does this work. A refrigeration guy can do it.
It is an E450 Super Duty v10 Triton (Jayco class C motor home)
The high and low Freon valves are located on the air conditioning compressor. Use the low Freon valve to recharge the air conditioning system.
To recharge the air conditioning on a 2002 Ford Excursion, first, locate the low-pressure service port, typically found on the larger diameter aluminum line near the firewall. Use a refrigerant recharge kit, ensuring you have the correct type of refrigerant (R-134a for this vehicle). Connect the recharge hose to the low-pressure port, start the engine, and turn the A/C to maximum. Follow the instructions on the refrigerant can to add the refrigerant until the system reaches the recommended pressure.
134a there a tag that says how much or system holds if you have rear air its more
In a 1998 Ford Windstar, the port to recharge the air conditioning system is located on the low-pressure side of the AC system. You can find it near the accumulator, which is typically mounted on the passenger side of the engine bay. The port is usually a smaller fitting, distinct from the high-pressure side, and is often covered with a plastic cap. Always ensure the engine is off and the AC system is not under pressure before attempting to recharge.
To recharge the air conditioning on a 1992 Ford Thunderbird, first ensure you have the correct type of refrigerant, which is R-134a for this model. Locate the low-pressure service port, typically found on the larger of the two lines connecting the AC compressor. Connect the recharge kit to the port, start the engine, and turn the AC to the maximum setting. Follow the instructions on the recharge kit to add refrigerant until the system reaches the recommended pressure. Always wear safety goggles and gloves while handling refrigerants.
The 1989 Ford Escort is computer controlled and therefore has no points or gap.
where is the ac recharge port on a 93 ford explorer located?