In the fuel pump module located in the fuel tank,it can be purchased separate from the module.
To remove a fuel sender unit, first, ensure the vehicle is off and cool, then disconnect the negative battery terminal for safety. Access the sender unit by removing the rear seat or fuel tank cover, depending on your vehicle's design. Disconnect the electrical connector and any fuel lines, then unscrew the retaining ring or bolts holding the sender in place. Carefully lift the sender unit out of the tank, taking care not to damage the unit or the tank.
The sender is in the tank and something is wrong with it. It probably needs a new sending unit.
near the oil filter
The fuel gauge sending unit is located inside the fuel tank.
I think those are separate in 94 on Chrysler products. If you call a parts store they can verify it.
Unit is incorporated in the door latch and is not serviced. You'll have to replace the latch assy.. Where is the sender for the automatic doorlock?
Under the back seat there are two access panels to the tank. The fuel pump/sender unit is under the O/S panel and the other sender unit is under the N/S. You can tell the difference as the fuel pump and sender combined unit will have two electrical connectors. The solitary sender only has one and a fuel return pipe i think.
Hmmm
under back seat
its in the fuel tank as part of the sender unit.
The fuel sender unit on a 2006 Toyota RAV4 is located inside the fuel tank. To access it, you typically need to remove the rear seat and then the access panel or directly drop the fuel tank, depending on the specific model. The sender unit is part of the fuel pump assembly and is responsible for measuring the fuel level in the tank. Always ensure to follow safety precautions when working with fuel systems.
Do you mean fuel sender? If you do it's located in the fuel tank and is a complete unit (pump & sending unit).