The heater core is located in the center of the dash inside the heater unit. If you look under the dash on the passengers side you will see, from right to left, a blower, the AC box then the heater unit where the core is.
Also, in the engine compartment you will find two coolant hoses that enter the firewall near the center, those hoses connect directly to the heater core.
the heater core for a 2002 Mitsubishi Galant is located behind the fire wall under the dashbord in the center the heater core for a 2002 Mitsubishi Galant is located behind the fire wall under the dashbord in the center
Behind the Glove Box.
Look for two coolant lines going into the firewall. That's where your heater core is located.
how much is to replace heater core on 2004 mazda 6
The heater core in a 1994 Mazda MPV is under the dash on the passenger side. The dash has to be taken apart to change out the heater core.
The heater core is located in the heater box which sits up against the firewall behind the dash board, you have to remove the dash to remove the heater box
Where is the heater core for a 2002 pontiac montana
The heater on the 03 Mazda Tribute is going in and out. What is the problem and how can it be fix?
To change the heater core on a 1988 Mazda MX-6, first disconnect the negative battery cable and drain the coolant from the radiator. Remove the dashboard and center console to access the heater core, which is located behind the firewall. Disconnect the hoses connected to the heater core, unscrew any mounting brackets, and then carefully remove the old heater core. Install the new heater core by reversing the disassembly steps, ensuring all connections are secure and refill the cooling system with coolant.
how do you change a heater core on a 2002 Nissan altima 2.5
You will need to drain the anti-freeze from your 1995 Mazda 626 cooling system. Remove the water lines from the heater core. Remove the heater core retaining bolts. Reverse the process to install the new heater core.
Replacement of the heater core on a 1993 Mazda Protege is going to first require the removal of the entire dashboard. Once that is removed then the heater control box will need to be removed and disassembled in order to get access to the heater core inside.