On a 1988 Honda Civic, the ignition coil is typically located near the engine, mounted on or near the intake manifold. It is often positioned close to the distributor, as the coil sends the electrical current to the distributor cap. To access it, you may need to remove some engine covers or components, depending on the specific model and configuration. Always consult the vehicle's service manual for precise details and diagrams.
HEI ignition system? Inside the distributor cap (top)
It could either be a bad ignition coil, a bad ignition rotor, a bad ignition cap, a bad ignition control module (if equipped), or a bad coil to cap wire.
yes its located on the p/s firewall next to the ignition coil
The pickup coil in a 1988 Ford 2.9L engine is part of the ignition system, specifically within the distributor. It generates a voltage signal as it detects the rotation of the distributor shaft, which is linked to the engine's camshaft. This signal is sent to the ignition control module, which then triggers the ignition coil to produce a spark at the correct timing for combustion. Essentially, the pickup coil plays a crucial role in ensuring the engine runs smoothly by coordinating the ignition timing.
On older civics (6th generation and below) the distributor coil was sometimes in the distributor itself (located on the passanger side of the valve cover. Even older ones have a separate coil usually mounted near the passanger shock tower.Newer civic (seventh generation and above) have distributorless ignition systems with coil on plug design. The coils on these vehicles are located on top of each sparkplug, hence "coil on plug".AnswerIgnition coil of 87 and older civics is moumted on the body, just follow the high tension wire..... on 88 to about 2002 (not too sure) its inside the distributor...... for the newer ones, each spark plug have their own individual coils.....
My guess would be a weak ignition coil. Same thing happened to my delta. Wouldn't start in cold weather. Changed the ignition coil (60bucks) and it's been starting good ever since.
To replace the coil packs in a 1994 Oldsmobile 88, first, disconnect the negative battery cable to ensure safety. Remove the engine cover and locate the coil pack assembly, usually situated near the ignition module. Disconnect the electrical connectors from the coil packs, then unbolt and remove the old coil packs. Install the new coil packs in the same position, reattach the connectors, and finally reconnect the battery cable.
Its the small silver canister in front of the ignition coil. it has white wires running horizontally off of it. It looks like a capacitor.
how to changr pick up coil 88 vandura
Same as removal for the 93 already answered by someone else. Matter of fact, almost everything is the same I think for from 88 or so to 94.
No, 92 and sometimes 93, but not 88-91
No it does not. I have an 88.