How do you change a thermostat on a 2001 Pontiac Grand Prix 3.8 gtp
in the water pump
The 2001 Pontiac Grand Am 2.4 liter engine PCV valve is located on the firewall. The valve will be on the drivers side firewall in the engine compartment.
195 is the thermostat that goes in a V6.
remove all the coolant in the system take out thermostat put new thermostat in fill system...
To install a thermostat in a 2001 Pontiac Grand Am, first, ensure the engine is cool and disconnect the negative battery terminal. Drain the coolant from the radiator, then locate the thermostat housing, which is typically near the engine block. Remove the housing by unscrewing the bolts, take out the old thermostat, and clean the surface. Insert the new thermostat with the correct orientation, reattach the housing, refill the coolant, and reconnect the battery.
For thermostat replacement step by step instructions with pics- http://www.pfyc.com/supportfiles/tstat/tstat.htm . "G"
The factory tires and rims from a 2001 Pontiac grand am cannot work properly on a 2003 Pontiac grand am.
Rims and tires from a 2001 Pontiac Grand Am will fit on a 2003 Pontiac Grand Am. They have the same lug nut pattern.
how i can reset the security sistem for a Pontiac 2001 grand am
The 2001 Pontiac Grand Prix 3.8 liter engine intake bolt torque specification is 45 pounds. The intake bolts should be torqued in 15 pound intervals.
The estimated cost for parts and labor to replace the head gaskets on a 2001 Pontiac Grand Am with a 3.4 liter V-6 is $1,685 to $2,230. For this job, the labor alone is estimated to be $1,310 to $1,675.