0
What else can I help you with?
Which direction does the spindle nut turn on a 2001 dodge ram 1500 4x4?
Righty tighty, lefty loosy.
The driver side wiper blade on your 1998 Honda Accord doesn't move when you turn them on Does it just need a new fuse?
the spindle is stripped out tighten it up
Why would a faucet turn on by itself?
Loose spindle
Which direction do you turn the crankshaft bolt for removal on a 1998 Toyota Camry?
With the bolt facing you, you should turn the bolt anti-clockwise to loosen it. It will be a right hand thread.
Which direction to turn to take camshaft bolte off from 1998 Lexus ls 400?
Take off camshaft seal bolts
What are upper control arms?
Ah, well, see.... When you drive the car, the wheel spins. It is attached through a round thing, called a bearing, to a rigid object called a spindle or a knuckle. The spindle has to be able to move up and down to allow for bumps in the road and if it's a front wheel (or rear wheel with 4 wheel steering) it has to be able to turn for steering. The spindle is attached to the vehicle in at least three points to hold it steady. An upper control arm attaches to the spindle at the top of the spindle and keeps if from moving in a left/right direction. On some (but not all) vehicles it can also keep it from moving forward/backward and can push the spindle down and car up. It is usually attached to the spindle via a ball joint.
How can I remove a bike pedal?
To remove a bike pedal, you will need a pedal wrench or a hex key that fits the pedal spindle. Turn the wrench counterclockwise to loosen and remove the pedal from the crank arm. Make sure to turn the wrench in the direction that matches the pedal's threading, which is typically opposite on the left side pedal.
What are the release dates for My Turn - 1998?
My Turn - 1998 was released on: USA: 1 September 1998 (Austin Film Festival)
In what direction should I turn to remove the pedals from a bike?
To remove the pedals from a bike, you should turn them in a counterclockwise direction.
How can I make spinning wheels?
To make spinning wheels, you will need a circular frame, a spindle, and a flyer. Attach the spindle vertically in the center of the frame and connect the flyer to the spindle. Add hooks to the flyer for the yarn to wrap around. Turn the wheel to spin the flyer, which will twist the fibers into yarn.
What direction do smith and Wesson revolvers turn?
Counterclockwise as you view the cylinder from the rear of the revolver. Colts turn in a clockwise direction.
What is a 180 degree turn?
A turn where you face the opposite direction.
