answersLogoWhite

0

your engine might be overheated, causing the vibrations

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

95 Escort shaking vibrating and not always going when in drive also really loud vibrating whats up?

check the trans fluid, if it is low then it probably wont go in drive. The vibration could be caused by a misfire. is the engine light on? yes the engine light is on


Your overdrive is turning off on the highway going to drive?

if you lose ovverdrive and cruise control, check engine light comes on, its the TPS working intermittenly


What is a George Overdrive?

What you refer to as George overdrive is known in the trucking industry as Georgia overdrive. It is going downhill with your truck out of gear. This is gone down grades to allow the truck to accelerate beyond the normal top speed of the engine in to gear without damaging the engine.


When should you use overdrive?

You use an overdrive when the engine is not straining ,i.e., the road is not going up but rather going down, or your car is not loaded with heavy weights like passengers or goods, and you want to save gasoline.


Car wont shift into overdrive?

This can be caused by anything from a bad sensor to transmission going bad. A transmission mechanic can check for engine codes and other tests to verify if it is a simple fix or major repair.


How do you know if you are out of overdrive in a Dodge van?

In a Dodge van, you can tell you're out of overdrive when the overdrive indicator light on the dashboard is off, or if you notice an increase in engine RPMs when driving at higher speeds. Additionally, if the van shifts to a lower gear during acceleration or when going uphill, it may indicate that overdrive is disengaged. Listening for changes in engine sound or feeling a difference in power and performance can also indicate the transition out of overdrive.


When you get to 50 miles an hour your steering wheel starts vibrating what is going on?

check your tire balance or you might need an alignment


How is it harmful to not shift into overdrive at high speeds?

It is not, but the engine works harder. You generally want to keep the RPM's as low as possible while driving. If you are going to be driving for a long time at the same speed, then it's better to enable overdrive no matter how fast you are going. Not only will your engine last longer, but you get better fuel mileage!


What happens when changing gears from overdrive to 3 and why to do it on hills?

Going up hills doesn't allow engine to "lug" and overheat Going down hills supplies engine braking for safety and will prevent brakes from fading and overheating


What does it mean when the check engine light is on a for a Toyota RAV4?

Every vehicle has warning lights to inform the driver of things going on. The check engine light comes on because there is something going wrong with the engine.


When to turn off overdrive in your car?

The overdrive should be switched off when you want to avoid unneccessary shifting. If you are driving on a hilly road, the vehicle will shift out of overdrive going uphill to maintain speed while pulling the vehicles weight up the hill, and shift into overdrive going down the hill to save fuel when additional engine power is not needed. When towing with an automatic transmission, the vehicle may tend to repeatedly shift in and out of overdrive due to the added weight. In scenerios such as these, you should turn off the overdrive to avoid the unneccesary shifting which puts more wear and tear on the transmission.


Why does the check engine light keep going on and off in 1997 mercury mountaineer?

If the check engine light is blinking that means that an engine cylinder misfire has been detected