There are two possibilities:
There is an integrated alarm that you operate just buy having the correct key
or
Someone has fitted a fake alarm led. (light)
To reset the anti-theft alarm system on a 2007 Dodge Caliber, first ensure that the vehicle is unlocked using the key fob or the physical key. If the alarm is still activated, insert the key into the ignition, turn it to the "On" position without starting the engine, and wait for about 10 minutes until the security light turns off. After this, turn the key back to the "Off" position, and then start the vehicle. If these steps do not work, consult the owner's manual or a professional for further assistance.
Yes if it is working correctly.
The blinking alarm light on the instrument cluster can indicate a few different issues. It may signify a malfunction in the vehicle's alarm system, such as a faulty sensor or wiring problem. Alternatively, it could be a reminder of a security feature, such as key fob detection or an unarmed alarm system. If the light persists without any alarms, it's advisable to consult the vehicle's manual or a professional mechanic for diagnosis.
You want the red light to blink, as the basic Toyota security alarm is contact based, meaning it will sound the horn when a door is forced open. The blinking red light shows that the system is armed and will activate when the doors are secure and locked.
To stop the blinking light and cancel the dual alarm on a GE radio model 74801A, first press the "Alarm" button to toggle the alarm off. If the light continues to blink, ensure the alarm time is not set; you may need to adjust or reset the alarm settings. Consult the user manual for specific instructions related to your model, as the button functions can vary slightly.
the flashing security light in the dash is not flashing and vehicle will not start
u need to replace the flasher unit in the vehicle
Yes
Sounds like an alarm system most likely check under dash or hood for alarm and disconnect. Also could be a bad hazard switch.
When the vehicle is shut off and locked up , the flashing theft light shows that the alarm system is armed
A car that has a alarm will usually have a red light on the instrument panel that when you lock the car with the key fob will come on and stay on for a few seconds. After the alarm is set the light will begin to flash. To test the alarm roll down the drivers window and close all the doors and trunk and on some cars even the hood has to be closed. Lock the doors with your key fob and when the red light starts to blink unlock the door manually by reaching inside to unlock it and open the door from the outside. The alarm should sound. To turn off the alarm use the key fob to unlock the doors.
If the oil light comes on and an alarm sounds, it is usually an issue of a low oil pressure warning. This could mean that oil is leaking from the vehicle or that the oil pump is not working.