why doesn't my rpm gauge and temp gauge, fuel gauge not work
The RPM gauge is connected to the same wiring on as all the lights on the dashboard. A faulty RPM gauge can be replaced but requires removing the whole dash from the vehicle.
while driving the rpm gauge work perfect, when start accelerating the rpm can not exceed 3 with interruption in the engine
Your engine is not running or your "RPM gauge" is broken.
rpm
Get to a shop quick.
Check oil level install manual gauge to get accurate reading
The most common reason for a 1996 Chrysler Cirrus odometer and RPM gauge to stop working is a fuse. If the fuse is removed from the dash and replaced, often times the odometer and RPM gauge will begin working.
Halloween
A good default setting is 1.5 turns. After that you can continue to turn them out with a rpm gauge connected. Then gauge needs to be accurate. Some timing lights will show rpm. Turn each one out separately until max rpm is reached. Ideally a exhaust gas analyzer is best to use as it will take into effect engine wear.
If it's just the gauge jumping and there is no actual increase in RPM, then the gauge or the pickup is faulty. If the RPM is actually climbing as you drive, your transmission could be gearing down or your transmission is slipping under load, automatic or standard.
your rpm gauge works off your engin your speed gauge works off the transmission where the cable slides into the transmission tha plastic geer is probably stripped