answersLogoWhite

0

The pilot has a thermocouple that generates an electric current when heated to hold open the control valve. If it is not hot enough there won't be enough current and the control valve won't stay open. Thus, gas will not flow to the burner.

User Avatar

Wiki User

12y ago

What else can I help you with?

Related Questions

What is the process for propane burner replacement?

The process for propane burner replacement involves turning off the gas supply, disconnecting the old burner, installing the new burner, and ensuring all connections are secure before testing the burner for proper functionality. It is important to follow manufacturer instructions and safety guidelines throughout the process.


Is a Bunsen burner adjusted by turning the collar?

Yes, the flame on a Bunsen burner can be adjusted by turning the collar, which controls the amount of air that mixes with the gas before it combusts. Turning the collar can change the size and intensity of the flame produced by the Bunsen burner.


Why does the furnace main burner shut off intermittently?

The furnace main burner may shut off intermittently due to issues with the thermostat, a dirty air filter, a malfunctioning flame sensor, or a problem with the gas supply. It is important to have a professional technician inspect and diagnose the issue to ensure safe and efficient operation of the furnace.


What will be the result If the gas regulator is turned clockwise while burner is still unlighted?

Turning the gas regulator clockwise while the burner is unlit will increase the gas flow to the burner. If the burner is then ignited, there is a risk of a large, uncontrolled flame or even a flash fire. It is important to always light the burner before adjusting the gas flow.


Why does a high efficiency furnace main burner shut off?

A high efficiency furnace main burner shuts off to prevent overheating and ensure safe operation.


Why does a high efficiency furnace's main burner shut off?

A high efficiency furnace's main burner shuts off to maintain a consistent temperature in the home and prevent overheating.


Where is the limit switch located on a furnace?

The limit switch on a furnace is typically located near the heat exchanger or burner chamber. It is a safety device that monitors the temperature inside the furnace and shuts off the burner if it gets too hot.


Why does the furnace main burner shut off after ignition?

The furnace main burner shuts off after ignition to maintain a safe and consistent temperature within the heating system. This helps prevent overheating and ensures efficient operation of the furnace.


Where is the location of the furnace high limit switch?

The furnace high limit switch is typically located near the heat exchanger or burner chamber of the furnace.


Can the fan timer control board on a York furnace cause the furnace to continue running with the burner in operation?

yes it can fan


Why does a high efficiency furnace's main burner shut off after the initial ignition?

A high efficiency furnace's main burner shuts off after ignition to maintain the desired temperature in the home and prevent overheating.


Why does flashback occur in a gas furnace?

Flashback in a gas furnace occurs when the flame inside the furnace burns back into the burner assembly, usually due to a disruption in the airflow or fuel mixture. This can lead to overheating and potentially damage the furnace. Regular maintenance and proper adjustments to the burner can help prevent flashback from occurring.