answersLogoWhite

0

What else can I help you with?

Related Questions

1991 Pontiac 6000LE won't start?

Does it turn over? Does it have: fuel spark compression?


Where is the cable adjuster on Pontiac 6000Le?

Look under the vehicle at the junction of the 3 cables


How do you replace the thermostat located on a 1989 Pontiac 6000LE?

You remove the old one and put a new one


How do you get to the back sparkplugs on a 1988 Pontiac 6000le?

Use a 'universal joint' socket adapter, a short extension, and a 3/8 ratchet


Does the engine move forward on a 90 Pontiac 6000LE to install blower fan If so how do you do it?

remove upper motor mout bolts and pry forward.


How do you change front disc brakes on a 1990 Pontiac 6000LE?

Purchase a repair manual at most parts stores, ( around $12 ) for detailed instructions on this and many other repairs.


How long does it take to replace the hood on a 1984 Pontiac 6000LE?

2 men.. under 1/2 hr.. its time consumming setting it into place and gettin the gaps and shims (if needed) right


What would cause brakes on 1987 Pontiac 6000LE to quit working One day i pushed the brakes and the pedal lost pressure and now it feels like only one of the brakes is working?

you have brake fluid leak in your brake system somewhere that need to be check.


What kind of coolant should you use for 1990 Pontiac 6000LE?

1990 was before GM switched to using Dex-Cool extended life coolant, so any of the traditional green ethylene glycol or universal coolant/antifreezes would work perfectly. Any brand will suit the car well.


Where is the thermostat located on a 1991 Pontiac 6000LE?

Look where the upper radiator hose connects to the engine and you should find the thermostat housing.Look where the upper radiator hose connects to the engine and you should find the thermostat housing.


Vehicle is 19916cyl Pontiac 6000LE-problem is dead drain on battery-have gone through 3 batteries and 5 alternators in 1 yr-no fuses are ever blown-any suggestions on where to look to fix this problem?

2 possibilities are 1.) the voltage regulator or 2.) the worst possible answer, wiring gremlins draining on ur elec. system i.e. (improperly wired stereo system) ~Chuck~


How do you change front brakes on a 1990 Pontiac 6000LE?

Remove wheels re-install 2 lug bolts to hold rotor in place Loosen caliper mounting bolts (2) Remove 1 caliper bolt to allow caliper to swing without stressing brake line Remove front brake pad Use "c" clamp on rear brake pad to retract piston Remove rear pad Install new pads swing caliper back in place tighten mounting bolts (35 ft lbs) Install Wheel DO NOT MOVE CAR UNTIL BRAKES ARE PUMPED TO RESET PADS TO ROTOR