A faulty pump, a faulty switch, a faulty release valve on the drain pipe.
neutral safety switch/ or reverse switch faulty thanks. how would i go about replacing the safety switch? is it difficult?
Check the safety switch. If the fuse for the Brake lights is blown it will also affect the safety switch; if the problem is intermittent then there is a possible short in the system or a faulty switch that needs replacement.
Yep - you're on the right track. Faulty resistor (rheostat) would be my first guess. The switch is probably fine.
i am assuming you mean the switch for changing from one tank to the second tank if this is correct,either the switch on dash is faulty or the actual changeover valve on chassis rail is faulty
faulty ignition switch
Faulty hazard switch.
i would have the light switch checked to see if it is faulty
faulty actuator switch. GM had some problems with these.
faulty wiring or you are accidentally hitting the switch and not realizing it
Bad solenoid, bad ground, faulty ig. switch.
A 1993 Mazda MX-3 does not have an inertia switch. If anything is wrong with what would normally be the inertia switch, the fuel pump may be faulty.