0
What else can I help you with?
2002camryv6 stalls when stopping for light after getting off turnpi?
Torque converter staying loced on transmission change solenoid
Why is my Chevy S10 1994 manual transmission not going into gear and stalls when shifting from nutural to first?
your clutch is probably shot
Why would your automatic car start fine idle fine but when you put it into gear it stalls?
IF IT IS A MANUAL TRANSMISSION CAR, THEN IT SOUNDS AS IF YOUR CLUTCH IS BAD/WORN OUT.
Engine stalls or dies when stopping or turning?
The idle speed needs adjusted upward if an engine stalls when you take your foot off the accelerator while stopping or turning.
What could be the problem with a 95 Monte Carlo that runs fine until it stops like at a redlight then stalls and dies?
The torque converter clutch may be staying engaged, causing it to kill the engine when stopping.
Dodge Neon Stalls When you Hit The Brakes?
If its an automatic I would bet money its the torque converter clutch soloniod in the valve body in the transmission, if its not that its probably a bad torque converter.
Your 1992 Izuzu rodeo stalls when you let the clutch out?
yea
Your engine stalls while in gear?
clutch switch is bad
Why is my Ktm 125 exc stalls after starting?
Needs a new clutch
1993 Grand Prix stalls will not idle when coming to a stop 3.1L and?
TCC (Torque converter clutch) Soleniod in the transmission is likely bad. Hope for that because if not it's a bad torque converter.
1994 LeBaron v6 stalls after warmed up?
clutch in transmission isn't engaging correctly, must see a transmission guy to know, and transmission would have to be replaced. Other possible is the wires going to the fuel injectors are shorting at the 8 pin connector. There are on engine near air intake.
When you put your car in gear it stalls out?
If your car stalls when you put it in gear, it could indicate a problem with the transmission, engine, or fuel system. Common issues include a faulty clutch, low transmission fluid, or a malfunctioning fuel pump. Additionally, it may be related to a vacuum leak or issues with the idle air control valve. It's advisable to have a mechanic diagnose the problem to ensure safe and effective repairs.
