0
What else can I help you with?
What are the five pins on the side sliding door for on the Windstar?
they are electrical connections for the stereo speaker and door lock.AnswerSee "Related Questions" for in-depth discussion on rear lift-gate sensors
What is speaker size for 2000 sunfire front door?
i believe all sunfire door speakers are 5 1/4" but with a mounting bracket, it can accommodate a 6 1/2" speaker, depending on the mounting depth.
What is the speaker size in a '99-'02 Ford Windstar LX?
1999 Ford Windstar Van with AM/FM/Cassette deckFactory replacement info: In-dash stereo 9-19/32" depth; Size code E,F2,S Front speakers Front Door : 6x8" Far rear speakers Mid Panel : 6x8" SAME APPLIES TO 1998 FORD WINDSTAR EXCEPT FOR THE INDASH STEREO DEPTH SIZE
What are the door speaker and rear speaker sizes for a 2000 GMC Jimmy sle?
door 6.5 rear 6.5 or 6x9
What is the size of the tires for ford windstar 2000?
On a 2000 Ford Windstar : Open the drivers door , and on the latch pillar will be an information sticker that shows the original size of tires on the vehicle from the factory
What are the door speaker and rear speaker sizes for a 2000 Chevy Malibu?
6X9 in back and 4X6 in front
What is the speaker size for door 2000 galant?
6 1/2
What is the tire size for a 2000 ford windstar?
On a 2000 Ford Windstar : Open the drivers door and on the latch pillar you will see an information sticker . One of the things it shows is the original size of tires on the vehicle from the factory
How do you change speaker in driver side door Chevy 2000 z71 silverado?
take door panel off should be screwed to door remove screws take speaker out unhook wires
What is the door speaker size for a 2000 Chevrolet pickup?
6 1/2 inch
How do you replace inner door handle 2000 windstar?
Start with removing the door panel.Now you can see the specific connection from the handle to the linkage.See "Related Questions" below for more
Why does the left rear electric door on my 2000 windstar sel respond to inner door switch some times but not all the time?
Probably dirty contacts in the switch.
