Most common possible problems:
1. Ignition coil faulty 2. EGR valve clogged/sticking 3. Engine Coolant Temperature switch malfunctioning 4. Vacuum leak Also check fuel pressure, hot and cold, to determine if fuel filter is clogged and/or fuel pump is faulty.
Check the oxygen sensor. My 1995 Grand Cherokee stopped stalling while driving after it was replaced.
Could be spark in the motor, or the distributor and rotor need to be replaced.
I had my "distributor pick-up" replaced. car would just die out, while i was driving.
yes
Diagnosis: Engine Won't Start or RunCheck related link below
BEst bet is the alternator... some tell tale signs are wierd gauge reads and it dies while driving it...
No, a bad EGR valve would cause pinging at driving speeds or stalling at idle. Have you checked the distributor cap? Fuel filter?
Check the fuel pump, rotor, and distributor cap.
Assuming the fuel filter has also been replaced, a bad distributor cap and or wires and spark plugs could do that also.
Make sure your plug wires are connected tightly to the correct spot on the distributor and the plugs.
If your 1985 Plymouth Caravelle continues to die despite replacing the fuel pump, spark plugs, wires, distributor cap and rotor, ignition coil, and fuel filter, the issue may lie in other areas such as the fuel injectors, engine sensors (like the crankshaft or camshaft position sensors), or the ignition timing. Additionally, check for electrical issues like bad grounds or wiring problems that could disrupt power delivery. A vacuum leak or a clogged catalytic converter could also cause stalling under load. It's advisable to perform a diagnostic check to pinpoint the exact cause.
A 1994 Chrysler LeBaron may stall out when put into drive or while driving due to several potential issues, including a failing idle air control valve, a clogged fuel filter, or problems with the ignition system, such as worn spark plugs or a malfunctioning ignition coil. Additionally, a vacuum leak or issues with the transmission can also cause stalling. It’s essential to perform a thorough diagnostic to pinpoint the exact cause. Regular maintenance and timely repairs can help prevent such stalling issues.