answersLogoWhite

0

What did you not hook up again?

User Avatar

Wiki User

16y ago

What else can I help you with?

Related Questions

How do you install an alternator on a 1990 Chevy Cavalier?

carefully with tools and the battery disconnected


How do you change an injector for a 350 mechanical motor mack?

To change an injector on a Mack 350 mechanical motor, first, ensure the engine is cool and disconnect the battery. Remove the injector lines and the hold-down bolts securing the injector. Carefully pull out the old injector, clean the seat, and then install the new injector with a new seal. Finally, reattach the hold-down bolts and injector lines, and reconnect the battery before starting the engine to check for leaks.


Why does the radio resets when the starter is installed in a 2000 Camry?

It is necessary to disconnect the battery to safely install a starter. When the battery is disconnected the radio loses its presets due to no power going to it.


How do you install a fuel injector on a 1994 Nissan Maxima?

I'll bite, how do you install a fuel injector on a 1994 Nissan Maxima.


What are the release dates for Xtreme 4x4 - 2001 2008 F-250 Superduty-Kelderman Air Install 2007-3?

Xtreme 4x4 - 2001 2008 F-250 Superduty-Kelderman Air Install 2007-3 was released on: USA: January 2007


How do you replace 1984 corvette crossfire fuel injector?

To replace the fuel injector on a 1984 Corvette with a Crossfire engine, start by disconnecting the negative battery cable and removing the air cleaner assembly for access. Next, detach the fuel lines and electrical connectors from the injector. Carefully unscrew the old injector from the intake manifold, then install the new injector, ensuring proper alignment and sealing. Finally, reconnect the fuel lines, electrical connectors, and air cleaner assembly before reconnecting the battery.


How do you install a steering wheel and airbag on a 1994 Camaro as I understand you have to be careful to not set off the airbag and the battery has to be disconnected?

That job is best left to a professional as serious injury can be caused.


How do you change fuel injector in 2004 Cadillac SRX 3.6L?

To change the fuel injector in a 2004 Cadillac SRX 3.6L, first, relieve the fuel system pressure and disconnect the battery. Remove the intake manifold to access the fuel rail, then carefully detach the fuel rail and pull out the old injector. Install the new injector, ensuring it is properly seated, reattach the fuel rail, and reassemble the intake manifold. Finally, reconnect the battery, and check for leaks after re-pressurizing the fuel system.


How do you install a steering wheel and airbag on a 94 camaro I understand you have to be careful to not set off the airbag and the battery has to be disconnected.?

I would not recommend airbag repairs for the diy'r. Take it to a professional. If you are still going to try, unhook the battery for at least 5 minutes before you begin.


How can you install a dual battery system?

1) find suitable location for 2nd battery 2) install battery cables + to+ and - to-.


How do you hook up a HEI distributor on a 71 Chevy 350?

With new plugs and wires numbered, battery removed or both cables disconnected, install HEI with printed guide in front of you, insuring each step is read 3 times, double-checked, before connecting battery.


How do you install a battery in a polaris scrambler 50cc?

im new in ATV a need to install a battery in a polaris scrambler , i have no idea in how to install, help!!!!