0
To change the harmonic balancer on a 1992 Oldsmobile Ciera, first disconnect the battery and remove the serpentine belt. Then, unbolt the harmonic balancer using a socket wrench and puller, if necessary, to detach it from the crankshaft. Clean the mounting surface, install the new balancer, and torque it to the manufacturer's specifications. Finally, reattach the serpentine belt and reconnect the battery.
What else can I help you with?
How do you replace the crank position sensor on a 92 Olds Cierra 3.3L and can it be done with out pulling the harmonic balancer?
The harmonic balancer must be removed to change the sensor because the crank position triggering rings on the back of the balancer are entwined with the pick-up, Sorry
Is the threading for a harmonic balancer left or right handed on a 92 Toyota pickup?
harmonic balance has left hand thread
What is the proper way to remove harmonic balancer on 92 jeep larado 4.0 motor?
harmonic balancer has threaded holes for attaching the proper puller.remove big nut from shaft then use whell puller
WHERE crank sensor 92 olds achieva?
It is located behind the harmonic balancer, also called the vibration dampener.
In a 1991 Bonneville Can the crankshaftsensor keep the car from starting?
i have a 92 bonn. and my car wasnt starting and it turns out it WAS the crankshaft sensor and the harmonic balancer
Why would a 92 Buick LeSabre not run turn over after Serpentine belt shreds?
probably damaged the crank sensor, or the tangs on the harmonic balancer
How do you install crankshaft sensor on 92 Oldsmobile cutlass ciera 3.3?
remove serpentine belt, turn crank with ratchet to align an open space on sensor which is behind harmonic balancer, disconnect plug on sensor, remove the 2, 13mm bolts and slip it out. put new one in by looking straight down behind harmonic balancer and see that the bands slip through the magnetic sensors without touching, tighten small 8mm screw which sets it in place, around 30 lbs. torque.
Setting timing for a 92 camaro?
loosten distributer bolt, point the timin light at the timing grid on the harmonic balancer and turn the distributer to either advance or retard the timing.
Where is the crank sensor for a 92 Mitsubishi diamante?
You'll need to take the harmonic balancer off and remove the timing cover to see it. Often you need to remove the timing belt to get it out.
92 eagle talon tsi all oil leaked out when friving?
That is true, you could have tried it. Check by the harmonic balancer or near the oil filter. Their is a bolt of some sort that blew out on mine.
Where is the fuel pump on a 92 Olds Ciera?
Inside the fuel tank.
Where is the computer on a 92 cutlass ciera?
It's behind the glove box.
