If this is the headlight bulb, it is attached to the connector as one piece.
Use socket
To replace the fog light on a 2007 Yukon, first, ensure the vehicle is turned off and the keys are removed. Access the fog light assembly by removing the necessary screws or clips on the underside of the bumper. Disconnect the electrical connector from the fog light, then remove the old bulb from the housing and replace it with a new one. Reassemble the fog light assembly and reconnect the electrical connector before securing everything back in place.
Hood of the engine compartment. Take hold of the headlight lightbulb connector. Push the connector in and turn at the same time. Do the same with the lightbulb. The lightbulb will come out. Reverse the process to install the new lightbulb.
H1 bulbs have 2 spade connector and the H7 bulb has 1 spade connector
The 2007 GMC Yukon has a V8 engine.
The 2007 GMC Yukon has 16 valves.
The 2007 GMC Yukon is a gas-powered vehicle.
The 2007 GMC Yukon has a 4-speed automatic.
The 2007 GMC Yukon has overhead valves (OHV).
There is a connector sticking out the back side of the bulb. Turn that connector about 10 - 20 degrees to the left and pull out. This will expose the halogen bulb.
2007 GMC YUKON BOLT PATTERN IS 6X5.5 OR 6X139.7
The 2007 GMC Yukon-XL has a V8 engine.