My mirror supplier and installer says that it can be done with a plumber's torch used to soften and peel off the mastic, if done very, very carefully. A blow dryer isn't hot enough. I have not tried this myself.
spray it with WD-40 and then wipe it off.
Try WD-40 and, if it will not loosen the adhesive, use a sharp chisel to GENTLY scrape it off.
get a mirror kit from auto parts storeor you can simply get adhesive especially for auto windows...you have to remove the mounting plate from the mirror stem and glue that back to the window. Once that has dried, you can put the mirror back on the mounting plate. If the mirror has electrical wires, you will need to detach and re-attach as needed.ANS2 - the best adhesive is the 'Loctite' Auto Mirror Adhesive, available in many auto parts stores.
You can remove dried barnacles from a fiberglass boat using a stainless steel scrubber or a pressure washer for large barnacles.
goo gone
The sultanas are "white", oval seedless grapes that have been dried to remove the water content.
Not to sure how to remove it but to prevent it add a pinch of dried rice in it
To effectively remove dried grout from surfaces, you can use a grout remover tool or a mixture of water and vinegar. Apply the solution to the dried grout, let it sit for a few minutes, then scrub with a brush or sponge. Rinse the area thoroughly with water to remove any residue.
i have dried white latex paint on car seat. what do i do to remove it?
Duck tape
If you mean raisins, they are dried grapes.
There are water based mastics that are very different from traditional types. Assuming you dont have ceramic tiles with grout that you want to remove. The best suggestion is to have a flooring pro take a quick look at what you have and tell you what to use in your particular case. Following well-intentioned advice could lead to you ruining your flooring.