. Turn it anticlockwise
== ==
Find the cap at the top of the valve cover. Remove the cap and add the oil.
Oil is added on top of the valve cover. There is a cap, that usually says oil on it. Remove the cap and the oil can be added here.
drain the oil, remove the oil pan, remove rod cap
Remove the oil cap an pour
Remove the oil filler cap and there should be a dipstick attached to the cap
There is a cap on the valve cover that says oil or has a picture of an oil can. Remove the cap and add oil.
There is an oil cap on the top of the valve cover. Remove the cap, add some oil.
To remove the oil filter cap on a 2004 Volvo S60, first ensure the engine is cool and then locate the oil filter cap on top of the engine. Use a 36mm socket or an oil filter wrench to unscrew the cap counterclockwise. Be prepared for some oil to spill out as you remove the cap, and ensure you have a rag or container ready to catch any drips. Once loose, you can finish unscrewing it by hand.
It is part of the oil cap. Just remove the oil cap and you will see the dip stick attached
To remove the oil filter cap on a BMW X3, first ensure the engine is cool and the vehicle is securely lifted if necessary. Use a suitable oil filter cap wrench to grip the cap; turn it counterclockwise to loosen and remove it. Be cautious of any residual oil that may spill out when you detach the cap. After removal, inspect the old filter and seal before installing a new one.
Remove oil-filler cap and add oil...