Leave the radio on for 1 hour and it will reset and then accept the 5 digit security code.
To reset the error in a 2002 Honda Accord radio, first, turn off the ignition and remove the key. Then, disconnect the negative battery terminal for about 10 minutes to reset the system. Reconnect the terminal, start the car, and turn on the radio. If the error persists, you may need to enter a security code, which can typically be found in the owner’s manual or obtained from a Honda dealer.
To reset the error code on a 2005 Honda Odyssey, you can disconnect the negative battery terminal for about 10-15 minutes. This will clear the engine error codes from the ECU. After reconnecting the battery, turn on the ignition without starting the engine to check if the error light has gone off. If the error persists, it may indicate an underlying issue that needs to be addressed.
Depends on what the error code is.
You should have gotten a card that has the anti-theft code when you bought the car. If you dont have the code then you'll have to go to your dealer to have them reset it or provide you the code.
To reset the error code E on a 2006 Honda Civic, you can try disconnecting the negative battery terminal for about 10-15 minutes. This action will clear the error codes stored in the vehicle's computer. Alternatively, you can use an OBD-II scanner to clear the codes directly. If the error persists, it's advisable to check for underlying issues that triggered the code initially.
The code varies from car to car. You will need to contact the local Honda dealership to see if they can provide you the code to reset the Pilot's radio.
To clear a radio error code E00 on a Honda Civic, start by turning off the ignition and disconnecting the car battery for about 10-15 minutes. This can reset the radio system. After reconnecting the battery, turn the ignition back on and check if the error code has cleared. If the problem persists, consult your owner's manual or a professional mechanic for further assistance.
You have to go to a Honda dealer and they will give you the code.
To fix the radio error code in a 2003 Honda Accord EX, you typically need to reset the radio by entering the correct security code. This code can usually be found in the owner's manual or obtained from a Honda dealership using your vehicle's VIN. Once you have the code, turn on the radio, and when prompted, enter the code using the preset buttons. If the radio remains locked, disconnect the car battery for a few minutes and reconnect it before trying the code again.
You cannot reset the radio without the code. But it is very easy to get the code. Go to the Honda owners website and register your Honda. After you register it click the link on the left Retrieve Radio/Navi Code. Click the link below.
By taking the cable off battery putting back on reset code