04 combo 1.7d. Hold mileage reset button and turn ignition to second setting (dash lights on), keep mileage button pressed for about 5 seconds until --- goes away, the service millage should reset.
how do you reset the service indicator on a 07 vauxhall combo van
You don't!
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
Just press the trip reset button
To reset the service light on a 2007 Vauxhall Agila, turn the ignition key to the "ON" position without starting the engine. Press the gas pedal fully three times within five seconds. After this, turn the ignition off and then start the engine to confirm that the service light has been reset. If the light remains on, repeat the process.
'Engine Airbag Code Reset Tool Vauxhall Meriva Zafira
needs to be done with a diagnostics machine.
To reset the service warning light on a Vauxhall Astra, turn the ignition key to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds, then switch off the ignition. Turn the ignition back on, and the service light should be reset. If it doesn't turn off, repeat the process or consult the owner's manual for specific instructions for your model year.
a special reset tool is needed
1 Turn Ignition off 2 Hold trip reset In 3 Turn Ignition on still holding trip reset and wait for three dashes 4 Turn off Ignition 5 Turn on Ignition to confirm reset To the best of my knowledge the above service reset procedure is applicable to most Vauxhall.
To reset the service light on a 2007 Vauxhall Corsa, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal three times within five seconds. Turn the ignition off, then turn it back on to check if the service light has reset. If the light remains, repeat the process or consult the vehicle manual for specific instructions.
To reset the service spanner indicator on a 2003 Vauxhall Vectra 2.0 DTI, turn the ignition to the "ON" position without starting the engine. Press the accelerator pedal fully three times within five seconds. Then turn off the ignition. Upon restarting the vehicle, the service spanner light should be reset.