answersLogoWhite

0

The oil FILLER cap is turned about a quarter ( 1/4 ) turn to the left and lifted out.

The oil filter is removed by using a special tool to unscrew it from the engine block.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

How much horse power in a 1986 Pontiac fiero 4 speed?

Well you wont like the truth but 4cylinders only had about 90hp, 6 cylinders about 110hp. but a car that's mostly plastic it doesn't take much.


How do you replace the interor of an 1984 Pontiac fiero?

Take it out and put new in? Each part is held in differently and I can't type 300 pages of instructions.


How many quarts of oil does a 1964 Pontiac lemans with 326 v8 take?

Most Pontiac engines will take around 6 quarts of oil....with a filter change.


How many people does it take to push a Pontiac fiero on a trailer?

depends on the angle of the trailers liftgate (ramp) & who you have for help, fieros are little but not light. they have a steel skeleton frame that puts the car @ about 4000lbs.


How much oil is needed to do an oil and filter change on a 1986 Suzuki Intruder?

Take 3 quarts with filter change


Are seat covers available for 1986 fiero grey?

Take a look at the Mr. Mike's seat covers to see if you like those. Also eBay might have something your looking for.


Why does your Pontiac transport die when you take your foot off the gas?

sounds like you may have a clogged fuel filter


Where is transmission filter for 2003 Pontiac Montana?

take off trans. oil pan and you can,t help but see it


How many quarts of oil does 2002 Pontiac grand prix take?

I believe it is 4.5 quarts, including filter.


What kind of oil does a 2001 Pontiac Aztec take?

SAE 5w30 any major brand + a quality oil filter.


How many quarts of oil does a 96 Pontiac Bonneville take?

A 1996 Pontiac Bonneville requires 5.7 quarts of oil in the crankcase. The oil filter should also be changed with the oil.


Are the 1986 and 1988 Pontiac Fiero starters the same?

The V6 starters all interchange If you are willing to experiment a little the lightweight starters off the same series engines in front drive GMs fit all so. Look for 3.1 and 3.4 engines from about 1996 on. Mine came from a Pick n Pull where you take your own parts of the salvage cars.