answersLogoWhite

0

Not much info to go on but, do a fuel pressure test to se if you are getting the proper fuel pressure to the injectors. Year, make, model and engine size would help us help you.

User Avatar

Wiki User

14y ago

What else can I help you with?

Related Questions

Have a 1991 Toyota 4 runner that will not start have put new fuel pump and new injectors and it still wont start?

Have you replaced the fuel filter? Are you sure the pump is running and the fuse is not blown or the relay is bad. Do you have fire, and do you have fuel pressure to the injectors?


1990 grand prix 3.1 new fuel pump filter knock sensor coil packs plugs wires injectors ecm new prom and still wont starts turns over has good spark proper fuel pressure but just wont fire help me?

Check compression.


1991 GMC S15 tbi injectors wont pulse new computer and fuel pump installed?

the ignition module or injector fuse


How do you reset the computer on a 1996 Chevy corsica. installed new engine and cant get any spark also cant get injectors to fire. gas comes to the fuel rail but wont go any further?

unplug it and disconnect battery for a minute. plug in after battery reconnected


In 97 Mercury Grand Marquis What causes cylinder 4 and 5 not to fire. I have new fuel injectors wires and plugs?

Have you checked the coil's ?


Trying to put in a CD player but it wont get power the old one will if i plug it back in but the new one wont?

New one may be defective.


Why does 1978 Ford F-250 starter cables get so hot and wont start?

Get a new starter. It's gone bad and is trying to draw too much power and can cause a fire.


1992 eagle talon and it will turn over but wont start what might be the problem?

spark plug or injectors. Try cleaning injectors or replace plugs if that doesnt work try new ignitions wires maybe there is a melted or cut wire. happened to mine....


352 ford mortor that you rebuilt you put a new rotor bug and new coil on it and it wont fire what should you look for next?

try plugs and wires that could be an issue and what wont it do?Does it turn over???


Why wont my Ford Mustang coil not fire?

if you have a new coil then it is probally going to be the ignition module located on the distributor.


I am trying to shrink my new power balance band. Will the dryer ruin its properties?

It wont shrink


How do you test a stator coil for a drain valve new one wont work power to it but dies when connected?

It's impotence and not power isn't it?