The OBD codes P1232 and P1244 on a Duramax 6.6 diesel could mean that the surge wire is mis- firing. Check to see if there is chafing on the chuggle connector circuit.
where is the fuel pump fuse or relay on 2005 duramax diesel
310hp
14.6 qts
10 qts
10gt.with filter and aways replace filter.
If it is cold outside then yes it is best to plug it in to make for an easier start and less stress on the engine.
where is the erg valve located on a 2005 DuraMax 2500
The EGR valve on a 2005 GMC Sierra SLE 3500 with a 6.6L Duramax diesel engine is located on the driver's side of the engine, near the rear. It is mounted to the intake manifold. Accessing it may require removing certain components, such as the engine cover, to reach it easily.
The 2005 GMC 2500 equipped with the 6.6L Duramax diesel engine produces approximately 360 horsepower. This engine is also known for its impressive torque output, delivering around 650 lb-ft. The combination of horsepower and torque makes it suitable for heavy-duty towing and hauling applications.
No
You can find the belt diagram for a 2005 GMC Duramax diesel engine in the vehicle's owner manual, which usually includes diagrams for engine components. Additionally, you can check online resources such as automotive forums, repair websites like AutoZone or Advance Auto Parts, or service manuals available for download. Another option is to look for a label under the hood that often contains the belt routing diagram.
In a 2005 Duramax diesel engine, the Exhaust Gas Recirculation (EGR) valve is located on the driver’s side of the engine, typically mounted on the intake manifold. It recirculates a portion of the exhaust gases back into the intake system to reduce emissions. Accessing the EGR can be somewhat challenging due to the surrounding components, so proper care should be taken when working in that area.