The alignment specs for a 1966 Chevrolet C10 typically include a front camber of -0.5 to -1.5 degrees, a caster of 2.5 to 4.5 degrees, and a toe of 1/16 to 1/8 inch. It's important to check the specific requirements based on the vehicle's modifications, as changes in suspension or tire size can affect alignment settings. Always refer to the manufacturer's service manual for the most accurate specifications. Proper alignment helps ensure optimal handling and tire wear.
pick up a chiltons repair manual for you year car at the library.
Chevy didn't have a V6 in their C10 in 63 but the GMC did in which case it would be timed at 5 degrees BTDC.
alignment specs are the same unless changing ride height. putting bigger wheels will not alter alignment
what are the wheel alignment specs for 1998 ford explorer
According to AllData, the toe alignment specs are 0.03 degrees +- 0.25 degrees, which essentially means zero degrees (no toe-in or toe-out).
The wheel alignment specs should compensate for crown in the road. The settings should be 2.54/2.73 for the caster and +.21/-.04 for the camber. The toe should be 1/16".
You will have to find a repair book maybe from the library for that answer.
get a chiltons repair manual from the library for your car.
go to the library and get a chiltons repair manual from 67 to get those specs.
chiltons repair manual from the library will have the answer.
CHANGE YOUR ALIGNMENT PERSON. They can be aligned to factory specs even if it has been in a wreck. This guy is trying a snow job.
Actual before is the alignment of the vehicle when readings are first made to determine how far out alignment is. Specified range is the parameters that alignment can be made to fall under manufacturers specs