The wheel alignment specifications for a 2009 Chevrolet Cobalt typically include a front camber angle of -0.5 to -1.5 degrees, a front toe setting of 0.10 to 0.25 inches, and a caster angle of 3.0 to 5.0 degrees. The rear camber should be around -0.5 to -1.5 degrees, with a rear toe setting of 0.10 to 0.25 inches. It's always best to consult the vehicle's service manual or a professional technician for the most accurate and specific alignment settings.
The emergency flasher switch on the 2009 Cobalt is located behind the steering wheel.
it may be hard to do, but turn the wheel and then turn the key out. its a safety feature.
is your steering wheel locked?? try turning your wheel hard either way and turn the key.
Open Cobalt was created in 2009.
To turn on the emergency flashers on a 2009 Chevrolet Cobalt LT2, simply press the button located on the steering column behind the steering wheel.
Torque ratings for many wheel bearings can be found here http://www.towtalk.net/forum/uploads/SkyForum/files/2009-05-16_210616_457377.pdf
how do you change clutch cable on cobalt
The rear wheel bearing torque specs for a 2009 Hyundai Sonata typically range from 90 to 100 lb-ft (pound-feet) for the axle nut. It's important to consult the vehicle's service manual for the exact specifications and any specific torque sequence required during installation. Always use a calibrated torque wrench to ensure proper tightening.
Will a 215/65R16 fit a 2009 Chev Cobalt LT
Go to Google and type 2009 cobalt 20K miles Kelly Blue Book Value. Good luck!
The alignment specifications for a 2009 Hyundai Accent typically include a caster angle of around 3.0 degrees, a camber angle ranging from -0.5 to +0.5 degrees, and a toe angle of approximately 0.08 inches for the front wheels. For the rear wheels, the camber should be around -1.0 degrees, with toe specifications around 0.0 inches. However, it’s always best to consult the vehicle's service manual or a professional technician for precise alignment settings.
260