The sensor will be round and about the size of a silver dollar. The sensor can be found beneath the passenger side dashboard.
There is no such part as a piston sensor.
what does a flasher relay in 2000 dodge durango look like.
how to change oil pressure switch in 2001 Dodge Intrepid I need to look at a diagram
Most of it looks like metal pipes.
looks similar to the camshaft sensor, but it's located in the bell housing on the transmission on passenger side.
No, the cam sensor is a flat plate under the distributor cap. The crank sensor is a round sensor with a mounting tab behind the passenger side cylinder head.
Under the front of the right cylinder head. If you look up from underneath you can see the three wire connecter. ************please note that this answer is wrong...this is the location of the CRANK SHAFT SENSOR****************
AnswerIt should be right in front of the engine on the drivers side, just past the timing belt cover. It will look like a plug with a little bracket holding it down from the side... Cam/crank sensorThe sensor on the fron of the engin is the cam sensor, the crank sensor is on the back passenger side of the motor right on the front of the transmission
I have 2 codes, P0031 and P0141. both are o2 sensors. (2002 dodge dakota sport) and I checked my fuse box, no fuse even there for the o2 sensor. I think that is my problem. haha, but, when u open your fuse case, look inside the top, look next to where it says "o2 sensor" for "spare" that is a spare for if yours goes bad.
Look in the driver side exhaust manifold.
The Dodge 3.9L has a timing chain.
Doesn't look like anything, as Dodge didn't make the Aries in 1996.