With a Wheel Bearing Hub Assembly, you might get both the wheel bearing and the hub assembly. Sometimes, especially with FWD vehicles, the front hubs will not have the bearing with them but the rear hub assembly will. Most part manufacturers will follow what ever the auto company recommends.
The hub/bearing assembly is pressed together. This item is not serviceable.
Well its a wheel bearing hub assembly that you need to buy. Autozone has a Timken/Wheel Bearning/Hub Assembly-front its $79.99 and they have the Duralast/Wheel Bearing/Hub Assembly-Front $51.99
It is extremely important. A defecting hub assembly or wheel bearing can cause you to have an accident.
Hub/bearing assembly to steering knuckle bolts, 77 ft lbs.Axle nut, 103 ft lbs.
I assume that it will be like a 1998 Sienna van. There is a sealed bearing in the hub assembly and you change the whole assembly. There are four bolts that hold the hub assembly to the suspension.
I assume that it will be like a 1998 Sienna van. There is a sealed bearing in the hub assembly and you change the whole assembly. There are four bolts that hold the hub assembly to the suspension.
a hub is what the wheel bolts to on the car.the hub bearings are the bearings that allow the hub to turn on the axle. most times they are called axle bearings,
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
103ftlbs
Remove tire, remove brake drum, remove brake assembly housing, remove 4 bolts from back of hub assembly, gently tap to remove hub/bearing assembly.
If you're trying to replace the rear wheel bearing and all you can find is the rear hub assembly, it probably means that you can't get just the bearing. Many vehicle manufacturers press the bearing into the assembly at the factory and there is no way to replace just the bearing. If they're offering the assembly, that's probably what you'll need to buy.