The flat rate to replace a hub seal on a semi-truck typically ranges from $150 to $300 per hub, depending on the shop's labor rates and the specific make and model of the vehicle. This estimate usually includes labor and may not cover additional parts or fluids needed for the job. It's always best to check with individual repair shops for precise pricing.
Take the semi-monthly rate and multiply by 12 to get the annual rate. Then take the annual rate and divide by 2080. To veryify your answer, take the hourly rate you just calculated and multiply by 86.67 and see how close you come back to the semi-monthly rate. Or, you can take the semi-monthly rate and divide by 86.67 (average hours in semi-monthly pay period) to get an hourly rate.
No special certification is required, but you do have to know what you're doing. Now if you have to replace the brake shoes (which often happens when a wheel seal goes out, as the shoes become contaminated with gear oil), you do need to be certified for THAT.
The axle on a 1991 Suzuki Tracker is a semi-floating design, meaning it has a shaft that is supported at both ends but relies on the wheel hub for additional support. To remove the axle to replace the outer seal, first, remove the wheel and brake components, then disconnect the axle from the wheel hub and the differential. Finally, pull the axle out of the housing, taking care to replace the outer seal before reassembling everything.
A semi-colon (;) is used to replace a period (.), connecting two closely related independent clauses within the same sentence. It is used as a stronger pause than a comma but not as final as a period.
45 RPM
How to replace a firing pin from a Charles Daly 20-gauge semi automatic
To transform a nominal risk-free rate into a periodic rate, you would first need to determine the compounding frequency (e.g., annual, semi-annual). Then, you can divide the nominal rate by the number of compounding periods per year to calculate the periodic rate. For example, if the nominal rate is 5% annually and compounding is semi-annually, the periodic rate would be 2.5% (5% / 2).
In semi variable cost :variable cost = change in cost/change in output then with that rate * output = variable cost semi variable cost - variable cost = fixed cost
Yes you can. Dark chocolate and semi-sweet have essentially the same consistency, and therefore bake at about the same rate.
You need a gunsmith.
The new interest rate due to the impact of the total fees is 13.233 % which translates into an effective interest rate of 13.6708 % due to semi-annual compounding.
Need to know what engine you have in order to answer this.