0
What else can I help you with?
What would cause Front suspension system to have excessive steering effort and rapid steering wheel return?
A front suspension system has excessive steering effort and rapid steering wheel return. The most likely cause of this problem is
Is a rack and pinion part of a suspension system?
It's part of the steering.
A front suspension system has excessive steering effort and rapid steering wheel return The most likely cause of this problem is?
The front suspension may have excessive positive camber
What two tools would you use for an inspection of suspension and steering system?
A good floor jack and a flash light.
What type of power steering fluid for 1995 BMW 740i?
The cap on the power steering reservoir will tell you what you require. ATF for BMW's without the self leveling suspension. If you do have a suspension system, then use Pentosin CHF 11S or CHF 7.1 or LHM.
What is a pinion?
A pinion is a grooved gear that attaches to the drive shaft of a vehicle. This is a major component in the steering and suspension system of a vehicle.
What causes excessive pitching suspension and steering?
No
Where are the chassis lube points for a 2004 Pontiac Montana van?
If all the components are original, there are no grease nipples in the steering or suspension system.
What is oil pipe going to cv boot 93 Honda prelude?
Oil lines to the suspension should be for the power steering system.
Excessive steering effort and rapid steering wheel return?
A customer notices difficult steering and rapid steering wheel return. What might be a possible cause?The rear suspension may have excessive positive casterThe front suspension may have excessive positive casteThe rear suspension may have excessive positive camber.The front suspension may have excessive positive camber.
Why is steering stiff and i have power steering fluid?
Steering/suspension components worn? Bad steering rack? Power steering pump getting weak?
What can be forged as one piece and can be referred to as a steering knuckle?
A steering knuckle is commonly forged as a single piece from a strong and durable material like steel or aluminum. It is a crucial component in the steering system of a vehicle that allows the wheel to pivot and turn in response to steering input from the driver. The steering knuckle connects the wheel hub to the vehicle's suspension system, enabling smooth and precise steering control.
