The starter bolt size for a 1992 Oldsmobile 88 Royale is typically 3/8-inch by 16, which is a standard size for many GM vehicles of that era. It's important to verify the specific bolt length, as it can vary depending on the starter type or any modifications made to the vehicle. Always consult a repair manual or parts database for the most accurate information.
how do i change the starter on a 1997 olds 88 royale?
wiring schematic for a 94 olds 88 royale
41 to 50 PSI, I have spent a lot of time figuring out a problem with ours.
well the easiest way that i have found to remove a starter is to UNHOOK BATTERY CABLES THEN UNBOLT THE STARTER FROM THE MOTOR YOUR HONESTLY A DUMB A@@ for asking this
They will bolt to the heads fine, however the 350 has a shorter deck height so the might have clearence issues with the chassis, starter, ground, ect.
They will bolt to the heads fine, however the 350 has a shorter deck height so the might have clearence issues with the chassis, starter, ground, ect.
18 Gallons.
Mostly the drivers and the headliners falling down.
one hour or less remove the starter on the lower front of the motor and the sensor is right above the starter held in with one bolt
Look on bottom area or engine
inside the starter.
I think what you're talking about is the air conditioning condenser. I replaced one on my '92 Olds 88 after it was found to be leaking the AC refrigerant. The original one on mine was unpainted aluminum but the replacement came painted black.