0
To change the thermostat on a 2004 Nissan Sentra, you typically need a 10mm socket to remove the bolts securing the thermostat housing. Additionally, having a ratchet and extension can help reach the bolts more easily. Always make sure to consult your vehicle's manual for specific details or variations.
What else can I help you with?
Location of thermostat housing on Nissan Sentra?
follow the top hose leading you from your radiator to your engine you should see a silver clamp holding the hose to what we call the housing , the housing has two screws with nuts on them use the right socket size to remove to change your thermostat which sits inside the housing
What do you use to change the spark plugs on a 94 Nissan Sentra your socket won't go around the plug there is not enough room?
You may have to find a thin-walled spark plug socket.
What size socket for a 2001 Nissan Sentra front spindle nut?
32 mm
Changing sparkplugs on 05 Nissan Sentra 1.8?
Changing the spark plugs on an 05 Nissan Sentra 1.8 begins with removing the plastic cover over the plugs, pulling the plug wires, and inserting a deep wall socket into each cylinder to remove the spark plugs. After each plug is removed, a replacement plug is placed into the socket wrench, and re-installed.
What types of tools do I need to have so I can replace the spark plugs in my 1998 Nissan Sentra?
You will need a general screwdriver, a spark plug socket, a socket wrench and and extender, a wire brush and a silicone dielectric compound. You should find more of these tools at SEARS or your favorite car parts dealer. You will need a spark plug wrench with an extension to replace the spark plugs in a 1998 Nissan Sentra. You can find an instructional video at www.youtube.com.
Where is the Radiator thermostat on Nissan vanette?
Lift up the passenger seat the thermostat housing is top left of the engine right by the dipstick, three 12mm bolts secure it. A socket and ratchet handle is needed. A
How do you change the spark plugs on a 1999 Altima?
How do you change the spark plugs in a 1999 Nissan Altima. Can not get socket on the plug.
How do you change spark plugs in 2002 Nissan Sentra 1.8?
To change the spark plugs in a 2002 Nissan Sentra 1.8, first, ensure the engine is cool and disconnect the negative battery terminal. Remove the ignition coil by unscrewing the bolts and gently pulling it off the spark plug. Use a spark plug socket to unscrew and remove the old spark plugs, then install the new ones by hand, making sure to torque them to the manufacturer's specifications. Finally, reattach the ignition coil and reconnect the battery terminal.
Where is the turn signal flasher on 2001 Nissan Sentra?
In a 2001 Nissan Sentra, the turn signal flasher is typically located in the fuse box under the dashboard on the driver's side. It can be found near the steering column, often clipped into a socket. For precise identification, refer to the owner's manual, as it includes a diagram of the fuse box and the specific location of the flasher.
Where is the oil drain plug on a 2006 Nissan Sentra?
The oil drain plug on a 2006 Nissan Sentra is located on the bottom of the engine oil pan, which is situated towards the front of the vehicle. To access it, you'll need to raise the car using a jack and secure it with jack stands. The plug is typically a hex or socket-type fitting, allowing you to use a wrench or socket to remove it for oil changes. Always ensure to have a drain pan ready to collect the old oil when you remove the plug.
What size star socket to change astra thermostat?
To change the thermostat on an Astra, you typically need a Torx (star) socket size T20. However, it’s always a good idea to check your vehicle's service manual or inspect the screws directly, as specifications can vary slightly between models and years.
Where is the Water temperature sensor located on a 1989 Nissan Pathfinder the Haynes manual said front right of the engine the manual said the sensor is on the intake manifold but I can not find it?
On an '87 it screws into the block right beside the thermostat and apparently requires a special Socket (Alltrade 648830 Nissan Coolant Temp. Sensor Socket)
