0
What else can I help you with?
Where is the windsheld washer motor on a 2015 dodge dart?
The windshield washer fluid pump is on the bottom of the fluid reservoir.
What is the voltage at the windsheld washer motor in a 1995 cadillac deville?
12 volts
Where is the windsheld wiper motor on a 1997 f 150 ford?
i think its located in the washer fluid reservoir
How do you replace the battery on a 1996 Chevy Monte Carlo Z34?
you will have to remove the windsheld washer bottle from the car the battery is under there ok good luck lobo
Why does the floor drain bubble when the washer drains?
They share the same drain and it is becoming clogged. Drain cleaner in both drains should help.
Can ivory soap be used in place of Woolite?
If you mean Ivory, like the dishwashing soap, no it can't. It will bubble way up and out of the washer, personal experience.
What's the difference between a front load washer and a normal washer?
The difference between a front load washer and regular washer is that a front load washer has a door in front were clothes are loaded and that is also where washer settings are located. The regular washer is usually a top load where clothes are loaded on top of the washer.
What is the correct order of installation for a washer and lock washer?
The correct order of installation for a washer and lock washer is to first place the washer on the bolt or screw, followed by the lock washer. The lock washer helps prevent the nut from loosening due to vibrations or other movements.
What happens if you put WINDSHEILD washer antifreeze in the coolant reservoir?
It will bubble (soapy). remove the bottle & wash it out & top it up with the correct coolant before you drive it. If you already have driven it you should get a cooling system flush $50-80.00
Can change 1995 aerostar windsheld washer pump?
Yes you can, if you're handy, but it is not easy. It is necessary to remove the battery first, then the battery tray, and then the windshield washer bottle. (the bottle has a small tab on the front which must be pried away from the front metal plate that it sit's against, in order to lift the bottle up). Once you do that, the pump itself is easy to remove and replace. (it just snaps out of it's place on the bottle - along with the rubber gromet which fits in the opening of the bottle). You'll need a socket wrench with two sockets - 3/8" and 7/16". (and about 30 - 60 minutes)
What is the recommended order of installation for a lock washer and a flat washer?
The recommended order of installation for a lock washer and a flat washer is to place the flat washer first, followed by the lock washer on top of it. This helps to ensure proper locking and securing of the fastener.
Where do you put the windshield washer?
in the washer bottle
