0
It could be any one of the contacts. When the distributor was put in, depending on what type of motor it is, number one could be anywhere. You will need to bring number one cylinder to top dead center on the compression stroke and see where the rotor is pointing. That will be number one and set the rest of the plugs from that.
What else can I help you with?
What is the number one software distributor in the United States in 2009?
Integra Telecom was the number one software distributor in the United States in 2009. Integra telecom was honored my Mitel on July 22, 2009. The number one software distributor may have changed over the years.
Which wire is number 1 on vortec 4.3 distributor cap?
where is number one on a vortex 4.3 v-6 distributor cap
What is number one on distributor cap?
I cannot answer this question.
How can you tell where the number 1 wire is on a distributor cap?
number one wire will point to the number one cylinder
When timing a 350 engine does the distributor point to the number one piston or the number one spark plug?
Yes the rotor should be pointing to the #1 cylinder when you are installing the distributor.
Which is the number one terminal on the distributor cap of a 1994 acura integra?
On a 1994 Acura Integra, the number one terminal on the distributor cap is typically aligned with the number one cylinder, which is the front cylinder on the engine. When looking at the distributor cap, the number one terminal is usually located at the top or the front, depending on the orientation of the cap. It's essential to confirm the cylinder numbering and the distributor cap layout specific to your engine model for accuracy.
How do you install a distributor on 2000 blazer?
Bring number one piston on compression stroke up to TDC. Drop distributor in so that the rotor points to the number one pin inside the distributor cap. The clamp at the base of the distributor only goes one way so there is no timing with a light necessary, the ECM takes care of that.
How do you find number one firing on a 454 distributor?
To find the number one firing position on a 454 distributor, first ensure the engine is at top dead center (TDC) on the compression stroke for the number one cylinder. You can do this by removing the spark plug for the number one cylinder and rotating the engine until you feel air pressure or see the piston reach its highest point. Once at TDC, the rotor of the distributor should be pointing directly at the terminal for the number one cylinder on the distributor cap. This indicates the position for firing.
Where is number one on Chevy Distributor cap?
The left bank is 1,3,5,7 and the right bank is 2,4,6,8. The distributor turns clockwise.
Looking for number one on distributor cap for a 1979 dodge 318?
# 1 on the distributor cap faces to the FRONT / CENTER
Where is the number one and number three located on a 1977 Chevy 350 distributor cap?
18436572
Where is the number 1 on the distributor?
To find where number one spark plug wire connects to the distributor, remove the distriutor cap and set number one piston at Top Dead Center (TDC). At TDC, the rotor should be pointing to where number one spark plug wire connects.
