One and a half quarts
HOW DO YOU RESET OIL LIGHT ON CUD CADET
Cub Cadet riding lawn mower's use 30-weight oil. Keeping the oil changed in your Cub Cadet will prolong the life of the mower, and help it run smoothly and efficiently.
10W-30 motor oil is recommended for use in a Cub Cadet hydrostatic zero turn lawnmower. Any brand of oil is acceptable.
PH2844
To put oil in a Cub Cadet, first ensure the engine is cool and the machine is on a level surface. Locate the oil fill cap, usually marked with an oil symbol, and remove it. Using a funnel, pour the appropriate type and amount of oil as specified in the owner's manual, then replace the cap securely. Finally, check the oil level using the dipstick to ensure it's within the recommended range.
2 qt
On the Cub Cadet use Fram PH2844 On the Briggs & Stratton use Fram PH8170
L14476 Purolator
PH4967 :)
The amount of oil needed for a Cub Cadet riding mower typically ranges from 1.5 to 2 quarts, depending on the specific engine model. It's essential to check the owner's manual for your mower to confirm the exact oil capacity and type, as it can vary. Always ensure the mower is on level ground and check the oil level using the dipstick before adding more oil.
(32 degrees and above, 30w oil) - (32 degrees to 0 degrees, 10w-30) - (32 degrees to -20 degrees below 0 and beyond -20, 5w-20 or 5w-30) Cub Cadets call for a low ash oil. it can be purchased at any cub cadet tractor dealership. i don't use nothing but cub cadet brand oil in my cub cadets because its formulated just for that peticular engine, and has what that engine needs for longevity and power. i guess that's just my personal preferance. just make sure that you use a low ash oil, and if your using 30W, make sure that its straight 30W, not 5w30 or 10w-30 ext.... -Brian-