It would certainly soften glue, but you may be better using either carburettor cleaner, cigarette lighter fluid or nail polish remover.
To remove WD-40 from metal, you can clean the surface using isopropyl alcohol or acetone. Apply the solvent to a clean cloth and wipe the surface until the WD-40 residue is removed. Repeat the process as needed until the metal surface is clean.
Before soaking metal jewerlry in WD40 to remove adhesive, test on a small area. This will prevent you from ruining the piece if the WD40 removes or damages the finish.
To effectively remove WD40 from a surface, you can use a degreaser or a mixture of dish soap and water. Apply the solution to the affected area, scrub gently with a cloth or brush, and then rinse with clean water. Repeat if necessary until the WD40 is completely removed.
Try white vinegar, or WD40, or lemon juice, or sunscreen.
wd40.
Wd40
wd40
If it is ,man made surface, like plasic, that won't damage easily, I would suggest WD40. However, DO NOT use on wood, or any surface that you are even slightly worry will get damaged. If WD40 Is impracticable, I would suggest using warm, soapy water, and a nylon scouring pad.
WD40 and some elbow grease
To effectively use WD40 on your bike to prevent rust and improve performance, first, clean the bike thoroughly to remove any dirt or grime. Then, apply WD40 to the metal parts of the bike, such as the chain, gears, and bolts, to create a protective barrier against moisture and rust. Make sure to wipe off any excess WD40 to prevent attracting more dirt. Regularly reapply WD40 to maintain protection and keep your bike running smoothly.
Depends on what glue. Goof Off will work for many.
WD40 and a few kicks.