answersLogoWhite

0

Loose or corroded battery cables? Bad starter solenoid? Dead spot on starter? Bad neutral safety switch?

User Avatar

Wiki User

17y ago

What else can I help you with?

Related Questions

Why sometimes does your 1990 Honda prelude 2.0 Si start when you turn the key but shuts off after you let go out of the starting position but will keep running if you hold key in the stating position?

Bad ignition switch?


How do you reset the theft system in a 94 sedan deville?

You can reset the theft system in your 1994 Cadillac Deville by putting the key into the ignition. Turn the ignition to the auxiliary position, without starting the engine. Leave it in this position for 30 seconds.


Why won't my brand new starter on my 1998 Chevy pickup disengage after starting and continues to run after ignition turned off?

your ignition switch is hanging up in the crank position.


How do you reset the airbag light on a 2007 Nissan Versa with Inteli-Key?

Perform the following steps in order. 1. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 4 secs. 2. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 4 secs. 3. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 4 secs. 4.Turn on ignition without starting and wait 7 secs then turn to acc position and wait 3 secs. 5. Turn on ignition without starting and wait 7 secs then turn to acc position and wait 2 secs. 6. Start car and wait 3 secs then turn off wait 3 secs and start car. Took me 2 tries as I was not getting the timing right...but it worked.


What is position 2 Mercedes -Benz IGNITION?

Position 2 on a Mercedes-Benz ignition switch typically refers to the "On" position, where electrical systems are activated but the engine is not running. In this position, functions such as the dashboard displays, radio, and other electronic components can be accessed. It is often used for pre-start checks and enabling accessories before starting the vehicle.


What does ACC on car ignition stand for?

ACC on a car ignition stands for "Accessory." When the ignition key is turned to the ACC position, it powers the vehicle's electrical accessories, such as the radio, without starting the engine. This allows you to use these features while the car is parked.


How do you troubleshoot the starting circuit of a 95 escort wagon with AT?

Things to check are: ignition switch, manual lever position switch, ignition relay, your starter, and last, your battery. Check all wires, cables and connections for condition and cleanliness.


How do you reset maintenance required light 2003 accord?

With the ignition OFF press and hold the odometer reset button while at the same time turning the ignition to the on position without starting the engine. After 5 seconds the light will reset.


What are the Components of the starting system?

Battery, kickstarter, ignition, ignition coil,


How do you disable the alarm on a 1986 Mercedes Benz 420 sel?

Turn your ignition switch to the auxiliary position, without starting the engine. Leave the ignition switch in the auxiliary position for 30 seconds.


With the key in the 'accessories' position it has power. When the key is moved to the start position the car loses power completely. Any suggestions?

When the key is in the "start" position all accesssories are designed to be "locked out" to concentrate all the available power to the starting circuit. How about the "on" position - do accessories have power at that position? - if not could be a bad ignition switch


How do you reset the service light off for a Honda accord 2005?

With the ignition off, push and hold to odometer reset button in while at the same time turning the ignition to the on position without starting the engine. After about 5 seconds the light will go out.