answersLogoWhite

0

Everyone is looking for new ways to save money. One cost saving measure you should consider is learning how to fill your own propane tanks.

For safety reasons, you should first inspect the propane tank closely for any kind of damage before you ever try to fill it. Things you should be looking out for are dents and rust damage anywhere on the tank. Also make sure to inspect the fitting and nozzle on the top of the tank for any damage as well.

Now you should check to see if the tank has expired. The date the tank was made should be stamped some where on the top of the tank. Check this date. If it’s twelve years past this date, the tank is expired. Take your tank to a store to be exchanged for a new tank.

Now you have to find the weight of the tank. Check the information that was stamped on the top of the tank near its date. It should tell you the weight the tank is when it’s empty. This number will be preceded by a “TW,” which stands for tank weight. Weigh the tank and subtract the tank weight to find out exactly how much propane is left in the tank.

Now you must find out the maximum weight of propane you can add into the tank. This information should come after the letters, “WC.” Remember this number as well as how much propane is currently inside the tank when you go to have it filled. Your propane dispenser should have a chart to help you convert this number so you know how much to fill the tank.

Lastly, you need to fill the tank. Simply go to a propane dispenser and connect the dispenser to your propane tank’s fitting. Twist the valve, and the tank will start filling with new propane.

You should also make sure to twist the bleeder valve open. This way when the tank is full some liquid will spray out to alert you it’s full. Lastly, close the two valves.

Following these steps, refilling your own propane tank is easy and a great way to save money.

User Avatar

Wiki User

15y ago

What else can I help you with?

Related Questions

How much does it cost to fill two 100 gallon propane gas tanks?

Around $75 it's usually $15 for the 20lb tanks.


Are forklift propane tanks and BBQ propane tanks interchangeable?

No. Forklift LPG tanks have a dip tube to draw off liquid. Propane engines feed off of propane liquid, and turn them into gasses through an internal engine component. While your traditional propane BBQ grill will feed off of vapors from the propane. Of course if you could change the valves this would be somewhat fixed, though you will be hard pressed to find a propane dealer to fill it. But the correct safety equipment would be in place to fill it (i.e. Fixed Liquid Level gauge). Replacing the valve and keeping the cylinder the upright position would allow you to use it, but by then it is basically going to cost you more than it's worth.


Could you fill hpa tank at a propane store?

Some gas companies have fillup stations where you can take your propane tank to have refilled with the assistance of an attendant. However, there may be a restriction as to how large of a tank you can transport legally (hazmat).


What are the available sizes for home propane tanks?

The available sizes for home propane tanks typically range from 20 pounds to 100 pounds.


What services does Suburban propane offer?

Suburban Propane offers propane delivery services for residential, commercial, and industrial customers. They also provide equipment sales and installation, tank monitoring services, and 24/7 emergency support. Additionally, they offer propane services for heating, cooling, cooking, and powering various appliances.


Where to find a 5 lb propane tank?

Usually your local auto store that sells propane, or similar propane shop, should sell individual tanks ranging from the smaller 5 pound to the larger 7 pound tank. Some may even sell 10 to 50 pound tanks.


Do tanks that fill CO2 also fill nitrogen tanks?

No, they cannot.


Is c2h8 a electrolyte propane a gas used in barbecue tanks?

No, C2H8 is not a chemical formula. Propane gas (C3H8) is commonly used in barbecue tanks as a fuel source. Propane is an electrolyte and can conduct electricity when in its ionized form.


What type of steel are propane tanks made from?

Propane tanks are typically made from a low carbon steel called ASTM A612 steel. This type of steel has good weldability, high impact strength, and is suitable for high-pressure containment applications like propane tanks.


Why are propane tanks rated for water capacity?

Propane tanks are rated for water capacity because it helps determine the tank's overall volume and its ability to safely store propane gas under pressure. Water capacity is used as a standard unit of measure in the propane industry for consistency and safety regulations.


How much does it cost to fill up a propane tank for a house?

The cost to fill up a propane tank for a house can vary depending on the size of the tank and current propane prices. On average, it can cost between 500 to 800 to fill a typical 500-gallon propane tank for a house.


Does Walgreen's sell propane tanks?

No, Walgreens typically does not sell propane tanks. Walgreens is primarily a pharmacy and retail store that focuses on health and wellness products, personal care items, and convenience goods. For propane tanks, customers are more likely to find them at hardware stores, gas stations, or specialized outdoor retailers.