0
Three atmospheres (3 ATM) of pressure is equivalent to a depth of approximately 30 meters (about 99 feet) underwater. This is because atmospheric pressure increases by about 1 ATM for every 10 meters of water depth. Therefore, at 3 ATM, you would be experiencing the pressure of three times the surface atmospheric pressure, which corresponds to that depth.
What else can I help you with?
How deep is 7 ATM?
About 200 feet.
What is the ATM Block diagram?
in ATM Block diagram there is user who can insert his card then enter pin no. request goes to bank get approval then insert amount then get result attributes for entity ATM 1.user ID 2. password(pin no.) 3. amount
How much amount can be drawn from an ATM at the maximum?
15 K from other banks ATM and 20-25 in some banks offer for their bank's accounts
How much concrete will it take for a slab 10x16 feet?
If it is 4 inches deep/thick, 2 cubic yards. If it is 6 inches deep/thick, 3 cubic yards.
How many bytes consists of ATM cell?
53 bytes long
How deep is 7 ATM?
About 200 feet.
What change in pressure would result in the volume of gas increasing A 2 ATM to 3 ATM B 3 ATM to 4 ATM C 4 ATM to 1 ATM D 1 ATM to 3 ATM?
A. An increase in pressure from 2 ATM to 3 ATM will result in a decrease in volume of gas. B. An increase in pressure from 3 ATM to 4 ATM will result in a decrease in volume of gas. C. A decrease in pressure from 4 ATM to 1 ATM will result in an increase in volume of gas. D. An increase in pressure from 1 ATM to 3 ATM will result in a decrease in volume of gas.
What will the total pressure be if two gases with pressure of 2 ATM and 3 ATM are mixed at a constant temperature?
2 atm + 3 atm
If two gases with pressure of 2 ATM and 3 ATM are mixed at a constant temperature what will the total pressure be?
The total pressure of the mixture of gases is equal to the sum of the individual pressures, so in this case it will be 2 ATM + 3 ATM = 5 ATM.
If 2 gases with pressures of 2 ATM and 3 ATM are mixed at constant temperature what will the total pressure be?
2 atm + 3 atm
What will the total pressure be and partial pressure be if two gases with pressures of 2 ATM and 3 ATM are mixed at a constant temperature?
The total pressure of the mixed gases will be 5 ATM. The partial pressure of each gas will remain the same as their individual pressures before mixing, so the partial pressure for the gas originally at 2 ATM will remain at 2 ATM, and the gas originally at 3 ATM will remain at 3 ATM.
If two gases with pressures of 2 ATM and 3 ATM are mixed at a constant temperature what will the total pressure be?
2 atm + 3 atm
How deep would you need to dive to experience a pressure of 2 ATM What would be the pressure at a depth of 100 m?
To experience a pressure of 2 ATM, you would need to dive to a depth of 20 meters (2 ATM = 1 ATM (surface) + 1 ATM (pressure at 10 meters depth)). At a depth of 100 meters, the pressure would be approximately 11 ATM (1 ATM at surface + 1 ATM for every 10 meters).
If two gases with pressures of 2 ATM and 3 ATM are mixed at a constant temperature what will the total preassure be?
When two gases are mixed at constant temperature, the total pressure can be determined using Dalton's Law of Partial Pressures. According to this law, the total pressure is simply the sum of the individual pressures of the gases. Therefore, if one gas has a pressure of 2 ATM and the other has a pressure of 3 ATM, the total pressure after mixing will be 2 ATM + 3 ATM = 5 ATM.
If two gasses with pressure of 2 ATM and 3 ATM are mixed at a constant temperature what will the total pressure be?
When two gases are mixed at constant temperature, the total pressure can be calculated using Dalton's Law of Partial Pressures. According to this law, the total pressure of a mixture of gases is the sum of the partial pressures of each gas. Therefore, if one gas has a pressure of 2 ATM and the other has a pressure of 3 ATM, the total pressure will be 2 ATM + 3 ATM = 5 ATM.
What phase change occurs as the pressure on the sample at -50ºC is increased from 1 atm to 3 atm?
condensationCondensation- Apex
How many layers are present in ATM reference model?
4 layers are present in ATM reference modal 1.physical layer 2.ATM layer 3. ATM adaptation layer 4. higher layer
