answersLogoWhite

0

Forty five 80 pound bags of cement are needed to make one cubic yard of concrete.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Basic Math

How much cement is required for 3200 square feet concrete?

To determine the amount of cement needed for a concrete slab covering 3,200 square feet, you first need to decide on the thickness of the slab. For example, a typical thickness is 4 inches (0.33 feet). The volume of concrete required would be 3,200 sq ft × 0.33 ft = 1,056 cubic feet. Since concrete is typically composed of about 10-15% cement by volume, you would need approximately 106 to 158 cubic feet of cement, which translates to roughly 3.9 to 5.9 cubic yards of cement.


How many cement bags need to build in 1000square feet home?

To estimate the number of cement bags needed for a 1,000 square foot home, it depends on the thickness of the concrete slab and the mix ratio. Typically, a concrete slab might require about 0.5 to 0.75 cubic feet of concrete per square foot, resulting in approximately 500 to 750 cubic feet of concrete for the entire area. Since a standard 94-pound bag of cement yields about 0.6 cubic feet when mixed, you would need around 800 to 1,250 bags of cement, depending on the specific requirements and design of the home. Always consult with a structural engineer for precise calculations tailored to your project.


How many bags of concrete is needed for a 10x10 patio?

To determine how many bags of concrete are needed for a 10x10 patio, you first need to calculate the volume of concrete required. A 10x10 patio is 100 square feet, and if you plan for a thickness of 4 inches (0.33 feet), the volume would be 100 sq ft x 0.33 ft = 33 cubic feet. Since standard concrete bags are typically 80 pounds and cover about 0.6 cubic feet, you would need approximately 55 bags of concrete (33 cubic feet ÷ 0.6 cubic feet per bag).


How many yards of concrete needed for 24' X 30' X 6 slab?

To calculate the amount of concrete needed for a slab, you can use the formula: volume = length × width × depth. For a 24' x 30' slab with a depth of 6 inches (0.5 feet), the volume is 24 × 30 × 0.5 = 360 cubic feet. Since there are 27 cubic feet in a cubic yard, you would divide 360 by 27, resulting in approximately 13.33 cubic yards of concrete needed for the slab.


How much concrete is needed for a 10' X 14' x 4 slab?

To calculate the amount of concrete needed for a slab measuring 10 feet by 14 feet and 4 inches thick, first convert the thickness to feet: 4 inches is approximately 0.33 feet. The volume in cubic feet is then calculated as 10' x 14' x 0.33' = 46.2 cubic feet. To convert this to cubic yards (since concrete is often sold by the cubic yard), divide by 27: 46.2 cubic feet ÷ 27 = approximately 1.71 cubic yards. Therefore, you would need about 1.71 cubic yards of concrete for the slab.

Related Questions

How many cubic meter per 1 bag cement 40 kg?

One cubic meter of concrete is equal to 1.308 cubic yards of concrete. If there are 5 1/2 bags of cement in 1 cubic yard of concrete, there would be 7.2 bags in 1 cubic meter of concrete. These are the 94 pound bags of portland cement or roughly 40kg bags so figure 8 bags total. Some will be left over


How many bags of cement in 3000 psi?

The number of bags of cement needed for a 3000 psi concrete mix can vary depending on the specific mix design, but a common ratio is approximately 1 bag of cement (94 lbs) for every 1 cubic yard of concrete. A typical mix for 3000 psi concrete might use a 1:2:3 ratio of cement, sand, and gravel. Therefore, for a cubic yard of 3000 psi concrete, you would typically use one bag of cement. However, for precise calculations, it's best to consult a concrete mix design guide or professional.


What is the number of bags of cement required for 1 cubic meter of M25 grade cement?

For M25 grade concrete, the mix proportion is typically 1:1:2 (cement:sand:aggregate). This means for 1 cubic meter of concrete, you would need 1/4 cubic meter of cement. As 1 cubic meter is equivalent to 35.32 cubic feet, and one bag of cement usually covers around 0.035 cubic meters, you would need approximately 7-8 bags of cement for 1 cubic meter of M25 grade concrete.


70 cubic mitre of concrete how many cubic mitre of sand gravel and cement to make concrete of grade 15?

I cant accuratly help you with the cement content but you need about 1 ton of sand and 1 ton of stone for every cubic meter of concrete. The cement content would depend on what you are using the concrete for. At 15 newtons of strength you would ( and this is just an educated guess) need about 95kg of OPC cement, 85kg of GGBS slag, 1.5lt of WRA (water reducing agent) and about 70lt of water to gain a 50mm slump per cubic meter. If I were you I would get it ready mixed. 70 Cube is a LOT of cocrete. Ready mixed 15 Newton concrete is about £75 inc vat per meter delivered. Regards Colin, a Tarmac concrete batcher.


How much does 1 cubic yard of concrete weigh?

This can vary do to the mixture of sand, stone, cement... but an approximate average would be 3000 lbs


How do you calculate total cost of 1 cubic meter reinforcement cement concrete of heavy foundation work?

You calculate the total cost of 1 cubic meter reinforcement cement for heavy foundation work by adding all of the costs. Essentially you would have to figure out the total of pounds of concrete for 1 cubic meter multiply that by the cost per pound and then add in the cost of labor it takes to pour 1 cubic meter.


How much cement is needed to build a sidewalk that is 132 inches long 24 inches wideand 3 inches think?

Well, you make a sidewalk from concrete, not just cement. Concrete consists of cement, sand, gravel and water. You will need 5.5 cubic feet of concrete. A standard sidewalk grade of concrete would be 1 part cement, 2 parts sand, 3 parts gravel- so the sidewalk needs 0.91 cu ft of cement- about 87 pounds worth- plus sand and gravel. If you want to buy the premixed bags of concrete (like Sacrete), you will need about 17 of the 40 pounds bags. And you did not ask, but 3 inches is kind of skinny- I would go for at least a 4 inch thick sidewalk.


How many 50kg cement bags is in 1 Cubic meter grade 30 concrete?

To determine how many 50 kg cement bags are required for 1 cubic meter of Grade 30 concrete, we need to break down the mix ratio and calculate the cement content based on that. Grade 30 Concrete Mix Ratio Grade 30 concrete typically has a mix ratio of 1:2:3 (Cement: Sand: Aggregate) by volume. This means: 1 part cement 2 parts sand 3 parts aggregate (gravel) However, the actual proportion of cement required can vary slightly depending on the specific mix design used by a contractor or engineer. For standard Grade 30 concrete, the cement content is typically around 350 to 400 kg per cubic meter. Since each cement bag weighs 50 kg, the number of bags required for 1 cubic meter of Grade 30 concrete would be: Number of bags = 350 kg / 50 kg   = 7 bags


How do you Determine the Specific gravity of cement?

Cement is usually purchased as a powdery substance that is mixed with sand, aggregate, gravel and water to form concrete. Since the cement itself is usually a powder, it is hard to measure a standard value for it's specific gravity. And since cement is usually not used by itself, knowing it's specific gravity is not particularly useful. A more useful question is "What is the typical density of concrete?" A rule of thumb answer is that normal cured concrete has a density of about 150 pounds per cubic foot. This includes the weight of the cement, sand, aggregate, and that part of the water that chemcially binds with the cement to form the concrete. Since water weighs about 62.4 pounds per cubic feet, concrete is about 2.4 times as heavy. Thus the specific gravity of concrete is about 2.4. If you took cement and mixed it with water, you would eventually have a hard lump of useless cement and it would also have a specific gravity of between 2 and 2.4. Ash Grove Cement from the Foreman, AR Facility normally has a specific gravity of 3.15. Depending on the source of the cement, the specific gravity may vary, but typically it will be close to this figure. Knowing the specific gravity of cement is critical when developing a mix design for concrete, because if one does not know the specific gravities of the raw materials, it is not possible to figure the proportions needed to give you the appropriate yield for a cubic yard of concrete.


How much cement is needed for a 1000 square 5 inch deep area?

Assuming you mean 1,000 square feet, the math works like this. Concrete is typically measured in cubic yards. A cubic yard is 3ft X 3ft x 3ft OR 27 cubic feet. Your volume of concrete would be 1000 x (5/12) = 416.6 cu.ft. / 27 cuft = 15.4 yards of concrete. Be sure to account for waste, slope (which may thicken your slab), etc.


How many cement bags required for 1 m3?

To calculate the number of cement bags required for 1 cubic meter (m³) of concrete, you typically need about 300 kg of cement for standard concrete mixes. Since a standard cement bag weighs 50 kg, you would require approximately 6 bags of cement to make 1 m³ of concrete. However, the exact amount may vary based on the specific mix design and project requirements.


How much concrete do I need for a fence post installation?

To determine the amount of concrete needed for a fence post installation, you should calculate the volume of the hole and then use a standard ratio of 1:2:3 (cement, sand, aggregate) to mix the concrete. Typically, a 50-pound bag of concrete mix will fill approximately 0.375 cubic feet. So, for example, if your hole is 2 feet deep and has a diameter of 8 inches, you would need about 0.25 cubic feet of concrete per post.